The second edition of Loudspeaker Handbook follows the same general outlines as the highly successful first edition and has been augmented and updated in many areas of technology. Most notable are the developments in large-scale, programmable line arrays, distributed mode loudspeakers, and ultrasonic-based audio transduction. Additionally, the core chapters on low frequency systems, system concepts, and horn systems have been expanded to include both more analytical material and a richer array of examples. Much of the success of the first edition has been due to its accessibility both to loudspeaker engineers and to lay technicians working in the field - a point of view the author maintains in the present work. A full understanding of the underlying technology requires a fairly rigorous engineering background through the second year of professional study. At the same time, the generous use of graphs, with their intuitive thrust, will be useful to all readers. Loudspeaker Handbook, Second Edition continues to be appropriate for use in courses at the undergraduate senior level, for graduate students, and for professionals in audio and acoustical engineering.
13 pages matching pattern control in this book
Results 1-3 of 13
What people are saying - Write a review
We haven't found any reviews in the usual places.
Cone and Dome Drivers
Principles of Magnetics
LowFrequency Systems and Enclosures
13 other sections not shown
acoustical output alignment Alnico amplifier angle applications Audio Engineering Society baffle basic Bessel array channel compression driver cone driver coverage crest factor crossover cutoff frequency Data courtesy JBL device device under test diaphragm directional distance distortion dome Eargle effects efficiency electrical Electronic enclosure equal Ferrofluids flux Frequency Hz frequency response group delay heat high frequencies horizontal impedance inductance LF driver LF systems load Lobing response loudspeaker Measurement loudspeaker system low frequencies magnet structure measured mechanical microphone modes monitor motion picture moving system nominal nominal impedance normally octave off-axis on-axis response operation parameters pattern control performance phase pink noise plane polar ported system power input power response radiation ratio relatively resistance resonance reverberation rolloff Section view shown in Figure shows signal sound reinforcement sound reinforcement system stereo subwoofer theater thermal transducer typical velocity vertical voice coil voltage wavelength