Guide to Engineered Materials, Volume 1American Society for Metals, 1989 - Materials |
From inside the book
Results 1-3 of 17
Page 14
... ( graphite fibers impregnated with epoxy resin ) into unidirectional , bi- directional , quasi - isotropic , and other configurations . A quasi - isotropic laminate consists of 0 , +45 , 90 , +45 , and 0 degree plies , and provides ...
... ( graphite fibers impregnated with epoxy resin ) into unidirectional , bi- directional , quasi - isotropic , and other configurations . A quasi - isotropic laminate consists of 0 , +45 , 90 , +45 , and 0 degree plies , and provides ...
Page 15
... graphite 7.0 High - modulus graphite 5.1 Steel 2.0 Boron 2.6 2 40 % Specific modulus , 10 in . E - glass 1.14 3 S - glass 1.38 4 Aramid ( Kevlar 29 ) 2.31 Aramid ( Kevlar 49 ) 3.46 7 Oriented polyethylene 4.85 High - strength graphite ...
... graphite 7.0 High - modulus graphite 5.1 Steel 2.0 Boron 2.6 2 40 % Specific modulus , 10 in . E - glass 1.14 3 S - glass 1.38 4 Aramid ( Kevlar 29 ) 2.31 Aramid ( Kevlar 49 ) 3.46 7 Oriented polyethylene 4.85 High - strength graphite ...
Page 61
... graphite also decreases friction and improves wear factors of ther- moplastics , but wear properties do not match up to PTFE and / or silicone lubricated versions . Graphite lubricants are usually reserved for components used in or ...
... graphite also decreases friction and improves wear factors of ther- moplastics , but wear properties do not match up to PTFE and / or silicone lubricated versions . Graphite lubricants are usually reserved for components used in or ...
Contents
ENGINEERED | 7 |
CONTENTS | 23 |
Selecting materials for high temperatures | 30 |
3 other sections not shown
Common terms and phrases
abrasive acids advanced composites Alcoa alloys Alumina Aluminum alloys American Society Annealed applications aramid ASTM austenitic behavior carbon fibers cast ceramics chromium coatings components copper corrosion resistance Courtesy creep rate creep resistance cycles deformation developed ductility electronic elevated temperatures Engineered Materials failure fatigue resistance ferritic flexural fracture toughness G-E Cold drawn G-E G-E G-E grain graphite hardening heat treated high strength high-temperature Hot finished impact resistance INCONEL INCONEL alloy increase iron load lubricated materials for strength materials for toughness materials for wear matrix METALS POLYMERS CERAMICS modulus molded moplastics nickel nitride notch nylon oxidation resistance particles performance phase plastics polyester Polyetheretherketone Polyethersulfone polyimides processing PTFE reader service card reinforced resin S-N curve shear silicon carbide silicon nitride Society for Metals specimen stainless steel stress structural superalloys surface tensile strength ther thermoplastic tion titanium Toughened VESPEL wear factor wear resistance welding yield strength