Complete Book of Wood Finishing |
Contents
Woods and Their Accepted Finishes | 1 |
Preparing the Surface for Finishing | 11 |
Methods of Applying Finishes | 39 |
Copyright | |
15 other sections not shown
Common terms and phrases
abrasive paper applied areas benzine bleaching blend bristles brown Brush or spray Chapter cheesecloth clean clear lacquer close-grained woods coat of clear coat of shellac color cracks denatured alcohol desired dipped dried Dry 1 hour dust edges effect enamel extra fine paper filled film final coat finish coat finishing material flat floor fluid tip furniture glaze gloss glue grade grain lacquer thinner Let dry light linseed oil liquid mahogany maple mineral spirits naphtha non-grain-raising obtained oil stain old finish ounces oxalic acid paint particleboard paste filler paste wax pattern piece pigment plywood polish pores powder pressure pumice putty putty knife refinishing remove rottenstone rubbing Sand lightly sandpaper scratches sealer second coat shade smooth solvent spots spray gun steel wool strokes synthetic thin coat tinted top coat turpentine undercoater usually varnish walnut wash coat water stain white shellac wood filler wood surface