Design and analysis of magnetoresistive recording heads
Magneto-resistive recording heads are sensors that exploit magneto-resistance effects to read digital magnetically recorded data. These recording heads are most commonly encountered as computer disk drives, a $40 billion industry, of which magneto-resistive-recording heads represent $2-4 billion of that total. The industry is growing because of ever-growing need for increased storage capacity. Although there are many books available on magnetic disk drives, there is no other book that deals with the topic on the technical level and with the practical applications that this author provides.
42 pages matching versus in this book
Results 1-3 of 42
What people are saying - Write a review
We haven't found any reviews in the usual places.
ThinFilm Properties for MR Sensors
Coupled Magnetic Films
Sense Element Biasing Shielding and Stabilization
4 other sections not shown
AFM layer amplitude AMR effect AMR heads analysis anisotropy anisotropy field areal density arising average behavior bias current bias curves biasing bit cell blocking temperature bottom spin valve calculated Chapter coefficient CoFe coupled films demagnetizing device Dieny disk drive DSMR DSSV electromigration emu/cm3 equation exchange energy exchange field experimental ferromagnetic FIGURE free layer function geometry GMR ratio hard-bias height h hysteresis identical films IEEE IEEE Trans increases insulating interface IrMn ktpi linear Magn magnetic field magnetic recording magnetoresistance magnetostriction material microtrack profiles negative NiFe noise normalized output signal parameters PdPtMn Permalloy Phys pinned layer pinning field plotted in Fig positive read width readback resistance saturation sense current sensor sheet resistance shields shown in Fig shows signal flux spacer stripe height structure temperature rise thermal thermal conductivity thickness thin films top spin top spin valve track width transfer curves transition unpinning versus voltage