Proceedings of the 7th International Conference on Discrete Element Methods

Front Cover
Xikui Li, Yuntian Feng, Graham Mustoe
Springer, Dec 1, 2016 - Science - 1455 pages

This book presents the latest advances in Discrete Element Methods (DEM) and technology. It is the proceeding of 7th International Conference on DEM which was held at Dalian University of Technology on August 1 - 4, 2016. The subject of this book are the DEM and related computational techniques such as DDA, FEM/DEM, molecular dynamics, SPH, Meshless methods, etc., which are the main computational methods for modeling discontinua. In comparison to continua which have been already studied for a long time, the research of discontinua is relatively new, but increases dramatically in recent years and has already become an important field. This book will benefit researchers and scientists from the academic fields of physics, engineering and applied mathematics, as well as from industry and national laboratories who are interested in the DEM.

 

Contents

78 Exploring the Undrained Cyclic Behaviour of Sand Using DEM
757
79 Effect of Particle Shape on the Formation of Sandpile
766
80 Influence of Inherent Anisotropy on the Soil Behavior in Simple Shear Tests Using DEM
777
81 Influence of Rigid and Flexible Top Boundaries on Geogrid Pullout Behavior Using DEM
785
82 DEM Analysis of Cone Penetration Tests in Pure and Structured Sand Grounds
793
83 Discrete Element Simulation of the Direct Shear Test of Sandy Soil
801
84 Micromechanical Simulation of Fines Content Effect of Soils Using the Discrete Element Method
811
85 Simulation of SandTire Mixture by Discrete Element Method
821

8 On the Apparent Noncoaxiality of the Tangential Interaction
67
9 Sample Size Effect on DEM Simulations of Binary Mixture
73
10 Evolutions of Fabric and Contact Forces of Granular Materials Under Continuously Varying b Value Using DEM
81
11 Random Packing of Tetrahedral Particles Using the Polyhedral and Multisphere Discrete Element Method
91
12 Energy Dissipation During Impact of an Agglomerate Composed of Autoadhesive ElasticPlastic Particles
100
13 Effect of Particle Shape on GeogridReinforced Granules
109
14 Applicability Evaluation of Similarity Principle in Discrete Element Analysis
117
15 Studies of the Performance of Particle Dampers in Centrifugal Fields and the Influence of Recovery Coefficient on Vibration Suppression
124
16 Algorithms and Capabilities of Solidity to Simulate Interactions and Packing of Complex Shapes
139
17 Particle Shape Consideration in DEM Triaxial Test Simulations
150
18 Study on the Microscopic Structure and the Bearing Capacity of the Elliptical Granular System in the Random Particle Size
161
19 Improving Estimates of Critical TimeSteps for Discrete Element Simulations
169
20 Discussion on the Difference of the Grain Particle Parameters in Reality and DEM
177
21 Stochastic Discrete Element Modelling of Rough Particles
183
22 Sphere Packing Based on Geometric Algorithm Generation Method
193
23 Verification of an Automated Work Flow for Discrete Element Material Parameter Calibration
201
24 The Influence of Rolling Resistance on Granular Responses Under Triaxial Loading Paths
209
25 An Investigation of Single Particle Crushing Tests on IrregularShaped Quartz Sand with DEM
217
26 The Influence of Rotational Resistance on Critical State of Granular Materials
225
27 A New Method for the Generation of Polydisperse DEM Specimens
235
28 Influence of Particle Shape on Mechanical Behavior of Granular Materials
245
29 The Influence of Particles Aspect Ratio on the Shear Behaviour of Granular Materials
253
DEMFEM Modelling of Granular Materials
265
30 Advances in Multiscale FEMDEM Modeling of Granular Materials
266
31 Modeling the Particle Breakage by Using Combined DEM and SBFEM
281
32 Numerical Simulations of the Interactions Between a Pneumatic Tire and Granular Sand by 3D DEMFEM
289
33 Combined FiniteDiscrete Element Method Modeling of Rock Failure Problems
301
34 A New Finite Discrete Element Approach for Heat Transfer in Complex Shaped Multi Bodied Contact Problems
310
35 Numerical Simulation of InPlane Loaded Unreinforced Masonry Walls Based on Homogenized Discrete Element Model
329
36 Study on MicroMechanism of Concrete Hydraulic Fracturing Using DEM
343
37 FiniteDiscrete Element Analysis of Interface Shear Damage to HDPE Geomembrane in Contact with Gravel Drainage Layer
351
38 Simulation of Particle Dampers Using the Combined FiniteDiscrete Element MethodA Simple Case
360
39 Investigation on the Integrity of Cement Annulus During Multistage Horizontal Fracturing with FEMDEM
369
40 Evaluation of DEM and FEMDEM in Modeling the Fracture Process of Glass Under HardBody Impact
377
41 Multiscale Modeling of Granular Assemblies Based on Different Micromechanical Strain
389
42 Simulation and Characterisation of Packed Columns for Cylindrical Catalyst Supports and Other ComplexShaped Bodies
397
Contact Bonding and Constitutive Modeling
408
43 A Gradient Model for Granular Materials Based on Thermomicromechanics
409
44 Role of DEM in Assessment of Continuum Equations for SolidSolid Drag Force with Various Particle Size Ratios
423
45 Elasticity and Mechanical Response of a Composite Particle System Induced by a Vertical Loading
429
46 Heavy Impact Compaction Modeling and Analysis on Unbound Paving Mixtures
437
47 A Simple Multiscale Model for Granular Soils with Geosynthetic Inclusion
445
48 A Novel Rock Contact Model Considering WaterSoftening and Chemical Weathering Effects
455
49 Investigation of Contact Parameters of DEM Model in Flow Process
465
50 On the StressForceFabric Relationship in Anisotropic Granular Materials
474
51 Influences of Stiffness Ratio Friction Coefficient and Strength Ratio on the Macro Behavior of Cemented Sand Based on DEM
485
52 A 3D Mesoscopic Model for Simulating Failure Process of Concrete Based on Discrete Element Method
496
53 DEM Simulation of Random Loose Packings of MicronSized Particles with Both Adhesion and Friction
515
54 Preliminary DEM Analysis on MicroMechanical Behavior of the Composite Cemented Granules Under Complex Stress Conditions
525
DEM Related Methods
535
55 CFDDEM Simulation of Flocculation and Sedimentation of Cohesive Fine Particles
536
56 Elasticity Constants of Clay Minerals Using Molecular Mechanics Simulations
543
57 A Comparative Study of Three Classes of Boundary Treatment Schemes for Coupled LBMDEM Simulations
551
58 Application of the Method of Peridynamics to the Simulation of Hydraulic Fracturing Process
561
59 Application of the Coupled Discrete Element Modelling and Modelica Based Multibody Dynamics in SystemLevel Modelling
571
60 Equilibrium Distribution Functions in Entropic Lattice Boltzmann Method
579
61 Parametric Sensitivity Study of Particle Shape Effect Through 3D Printing
593
62 Study on the Multisphere Method Modeling the 3D Particle Morphology in DEM
601
63 An Upgraded CFDDEM Investigation on the Liquefaction Mechanism of Sand Under Cyclic Loads
609
A CFDDEM Approach
618
Granular Flow
627
65 The Effect of Powder Flowability in the Selective Laser Sintering Process
629
66 A DEM Analysis of Particle Climbing in a Vibrating Pipe
637
67 Influence of Inclined Angles on the Stability of Inclined Granular Flows Down Rough Bottoms
647
68 DEM Simulation of Particle Flow in a ParallelHopper BellLess Blast Furnace Charging Model
659
69 Basal Effect in Mono and Bidisperse Chute Flows
670
OpenSource Power for FluidParticle Systems
679
71 Numerical Simulation of the Particular Flow on an Agricultural Screen with a Complex Motion Based on the Coupling Model of PMBK with DEM
687
72 Study on Drag Force Coefficients in Modeling Granular Flows in a SlotRectangular Spouted Bed
697
73 The Development of a Simplified System for Measuring the Passage of Particles on and Through Moving Screen Surfaces Using DEM
708
DEM in Soil Mechanics
722
74 Analysis of Strength Characteristics for Granular Materials Based on Discrete Element Simulation
723
75 On the Use of the Uniaxial Shear Test for DEM Calibration
733
76 Investigation on the RateDependent Behavior of Sands via DEM
741
77 DEM Analysis of Inclined Cone Penetration Test in Structured Sand Ground
749
86 Effect of Different Temperatures and Pore Pressures on Geomechanical Properties of PoreFilling Type of Methane Hydrate Soils Based on the DE...
827
87 Discrete Element Analysis of the Fabric Evolution of Granular Soils During Cyclic Loading
837
88 DEM Simulation of Dynamic Compaction with Different Tamping Energy and Calibrated Damping Parameters
845
DEM in Rock Mechanics
852
89 Discrete Simulation of Fracturing and Failure of Rock Samples
855
90 A New Rock Slicing Algorithm with Reduced Data Structure for Discrete Element Method Analyses for Rock Mechanics
863
91 MesoStructure Parameters of Discrete Element Method of Sand Pebble Surrounding Rock Particles in Different Dense Degrees
871
92 Dimensions and Brittleness Effect on the Size of Process Zone in Rocklike Material Characterized by Bonded Particle Model
881
93 Numerical Simulation of Resonant Column Tests on Jointed Rocks Using DEM
889
94 3D Numerical Modeling of Strength in Fractured Rock Mass
897
95 DEM Modeling of Brittle Behavior of Rock Specimens with Two Infilled Flaws
907
96 ThreeDimensional Discrete Element Model for Triaxial Tests of Graded Stones Under Different Gradations
917
97 3D Discrete Element Model for TBM Cutter Breaking Rock and Dynamic Loads Analysis
927
98 Calibration of Microscopic Mechanical Parameters of Granite Using Actual Distributions and Orthogonal Simulations
935
DEM in Chemical Engineering
946
99 CFDDEM Simulation of a Conical Spouted Bed Operating with High Density Particles
947
100 CFDDEM Study the Effect of CarrierDrug Mass Ratio on the Aerosolisation Process in Original and Modified Dry Powder Inhalers
957
101 A Numerical Study of the Effect of Loading Profiles on MixingSegregation of Particles in the Truck Mixer via DEM
967
A Comparative Study of DEM and FEM in Modelling Hopper Flow
977
103 Simulation of Multiphase Reactive Gas Transport Using Smoothed Particle Hydrodynamics
986
104 DEMCFD Modelling of Electrostatic Phenomena in Fluidization
995
105 Numerical Simulation of GasSolid Flow in a Wurster Fluidized Bed
1005
106 CFD Simulation of Hydrodynamics of ThreeDimensional Circulating Fluidized Beds with EMMS Model
1013
107 Investigation of GasSolid Flow Dynamics and Heat Transfer in Fluidized Beds by Using DEMLES Coupling Approach
1022
DEM in Geotechnical and Ocean Engineering
1036
Photoelastic Measurement and Discrete Element Simulation
1037
109 Influence of Base Roughness on Kinematic and Mechanical Characteristics of Debris Flows
1047
110 Numerical Study on Seismic Isolation Effect of Gravel Cushion
1055
111 Interaction Between Floater and Sea Ice Simulated with Dilated Polyhedral DEM
1064
112 Investigation into the SoilRoot Composites Using Distinct Element Method
1075
113 Macro and Micro Structural Characteristics of Force Chains in Overlaying Strata Above Top Caving Mining Face
1085
114 DEM Analysis of SmallDisplacement Earth Pressure Against a Rigid Retaining Wall with the Wall Moving Towards Structured Sand
1092
Powder Technology
1104
115 Numerical Investigation of Optical Sorting Using the Discrete Element Method
1105
116 Dependence of Granular Materials Homogenization on Geometrical Aspects in Commonly Used Mixers via DEM
1115
117 The Effect of Rotational Speed on Granular Dynamics and Homogenization in a Vertical Bladed Mixer
1123
118 DEM Modelling of Silo Loads Asymmetry Induced by Eccentric Discharge
1132
119 Concurrent Adaptive MassConserving Comminution of Granular Materials Using Rigid Elements
1143
120 Understanding Size Segregation in Tumbling Mills
1153
DEM in Mechanical Engineering
1169
121 Modeling Roughness Effect of Joint Using RoughJoint Model
1170
122 DEM in Analyses of Nuclear Pebble Bed Reactors
1183
123 Modified Modeling of Selftwist Process of Multistage Cable Based on Discrete Element Method
1193
124 DEM Analysis of Interaction Between Granular Materials and a Cutting Blade
1200
125 DEM Simulation of Rubble Ice Accumulation in Front of Water Intake Area of Nuclear Power Plant
1209
126 Optimizing Heavy Equipment for Handling Bulk Materials with AdamsEDEM Cosimulation
1219
DEM in Agricultural Engineering
1225
127 Nonlinear Dynamic Process of Soil Tillage Under Straw Mulching Model
1226
128 Study of Connection Mechanics Model and Mechanical Properties of Corn Kernel Carpopodium Based on DEM
1241
129 The DEMBased Digital Design Platform for Agricultural MachineryAgriDEM
1253
130 Study on Screening Efficiency of Banana Vibrating Screen Based on 3D DEM Simulation
1264
131 Determination and Analysis for Parameters of Shape Size Physical and Mechanical Properties of Soybean Grains
1277
132 Investigation of the Shape Dimensions and DEM Modeling Method of Maize Grains
1287
DEM in Transport Engineering
1296
133 Material Transport Study into a SAG Mill by DEM Impact on the Inclination of Lifter
1299
134 Numerical Simulation of the Interaction between the Grousers of Tracked Vehicle and the Soil Using Discrete Element Method
1307
135 Discharging Trajectory of the Bucket Wheel StackerReclaimer Based on DEM
1315
136 DEM Analysis of Ballast Breakage Under Train Loads and Its Effect on Mechanical Behaviour of Railway Track
1323
137 Simplified Multisphere ModelBased DEM Simulation of Particle Behavior in Hopper During Ship Loading for Dust Control
1335
High Performance DEM Computing
1343
138 GPU DEM Simulations and Experimental Studies of Ball Milling Process for Various Particle Shapes
1344
A Fast and Flexible Particle Solver Part A Technical Advances
1353
140 Computing Framework of LargeScale Dilated Polyhedral DEM Particles Simulation Based on GPU
1361
141 Computing with Nonconvex Polyhedra on the GPU
1371
142 Industrial Scale Particle Simulations on the GPU Using the BlazeDEM Code
1378
143 Simulation of Heat Transfer in Granular Systems with DEM on GPUs
1389
144 Analysis on Motion Behavior of Spherical Shell in a Periodical Shear Flow Based on CUDA Parallel Computing Technique
1399
DEM Related Experimental Studies
1408
145 Photoelastic Experiments on Force Chain Evolution in Granular Materials under Bilateral Flowing Conditions
1411
146 The Design and Development of the Granular Material Photoelastic Device with Multiway Loading
1418
147 Determination of Microparameters in DEM Through the Whole Surface Deformation Measurement in the Triaxial Test
1429
148 Identification and Analysis of Force Chain Structures in Photoelastic Experiments
1440
149 Study of Shear Behavior of Homogeneous and Heterogeneous Granular Materials by Experimentation and Numerical Simulation of Triaxial Test
1447
Preliminary DEM Analysis on MicroMechanical Behavior of the Composite Cemented Granules Under Complex Stress Conditions
1456
Copyright

Other editions - View all

Common terms and phrases

About the author (2016)

About the leading editor:

Li Xikui obtained his PhD at the University Wales of Swansea in 1989. He became Full Professor at DUT in 1992. He was an ARC (Australia Research Council) Int Fellow at University of Newcastle (2006). His main research interest is Computational Mechanics. He has published over 180 journal papers.

Prof. Li serves as a member on the Editorial Boards of Int. J. Numerical Methods Eng., Int. J. Damage Mechanics, Chinese Journal of Theoretical and Applied Mechanics and Chinese Journal of Computational Mechanics. He also served as vice-Chairman (1999-2003, 2007/11), Chairman (2003/07) of Academic Committee of Solid Mechanics of China. He was Director of Division of “Structures, Architectures and Environments”, Expert Panel Committee of the National Science Foundation of China (NSFC) (2000/01).

Bibliographic information