Tables for estimating median fatigue limits by Robert Eugene Little, American Society for Testing and Materials. Standing Committee on Publications - 1981 - 176 pages
Tables of surfaces and volumes of spheres and of prolate and oblate spheroids, ... by Franklin Marion Turrell - 1946 - 153 pages
Tables of surfaces and volumes of spheres and of prolate and oblate spheroids, ... by Franklin Marion Turrell - 1946 - 153 pages
Tagungsbericht by Internationale Arbeitsgemeinschaft der Archiv-, Bibliotheks- und Graphikrestauratoren, Institut für Restaurierung, Vienna, Magyar Országos Levéltár - 1972 - 269 pages
Tangent modulus and the strength of steel columns in tests by Olin Hanson Basquin - 1924 - 1 pages
TATF' 96 by Société française du vide, Deutsche Vakuum Gesellschaft - 1996 - 298 pages
Tatnall on testing by Frank G. Tatnall - 1966 - 234 pages
Tatnall on testing by Frank G. Tatnall - 1966 - 234 pages
Tech notes by Center for the Utilization of Federal Technology (U.S.), United States. National Technical Information Service - 1986
Tech notes by Center for the Utilization of Federal Technology (U.S.), United States. National Technical Information Service - 1985
Tech notes by Center for the Utilization of Federal Technology (U.S.), United States. National Technical Information Service - 1985
Tech notes by Center for the Utilization of Federal Technology (U.S.), United States. National Technical Information Service - 1984
Tech notes by Center for the Utilization of Federal Technology (U.S.), United States. National Technical Information Service - 1984
Tech notes by Center for the Utilization of Federal Technology (U.S.), United States. National Technical Information Service - 1983
Tech notes by Center for the Utilization of Federal Technology (U.S.), United States. National Technical Information Service - 1983
Technical statics and strength of materials by James R. Thrower - 1986 - 434 pages
Technical statics and strength of materials by James R. Thrower - 1986 - 434 pages
Technical statics and strength of materials by James R. Thrower - 1976 - 452 pages
Techniques for the direct observation of structure and imperfections by J. A. Belk - 1968
Techniques in rheological measurements by Abbas A. Zaman, University of Florida - 1998 - 48 pages
Techniques of materials preparation and handling by A L ̣ Austin - 1968
Techniques of non-destructive testing - 1960 - 216 pages
Technological aspects of the mechanical behavior of polymers by Turner Alfrey, American Chemical Society - 1974 - 107 pages
Technologien zur gezielten Erzeugung von Werkstoffstrukturen durch Kombination mechanischer und thermischer Behandlung by Gustav Zouhar (jun.), Karl-Ernst Hensger, Wolfgang Bobeth - 1981 - 35 pages
Technologies for synthetic environments by Robert Lee Murrer - 2004 - 260 pages
Technology in transition by Society for the Advancement of Material and Process Engineering - 1975 - 650 pages
Technology of engineering materials by Bain Richard Hilton - 1953 - 389 pages
Technology of engineering materials by Bain Richard Hilton - 1953 - 389 pages
Technology of industrial materials by H. C. Kazanas, Roy S. Klein, John Robert Lindbeck - 1974 - 397 pages
Technology of non-metallic coating by Anatoliĭ I︠A︡kovlevich Drinberg - 1960 - 531 pages
Temperature dependence and anisotropy of magnetization of ytterbium orthoferrite by Thomas Joseph Beaulieu - 1967 - 98 pages
Temperature dependence and anisotropy of magnetization of ytterbium orthoferrite by Thomas Joseph Beaulieu - 1967 - 98 pages
Temperature dependent nonlinear metal matrix laminae behavior by D. J. Barrett - 1986 - 123 pages
Temperature effects on concrete by Tarun R. Naik - 1985 - 184 pages
Temperature induced stresses and deformations in asphalt concrete by C. L. Monismith, G. A. Secor, Kenneth E. Secor - 1965 - 38 pages
Temperature rise under a rib by William Karush, G. Young, U.S. Atomic Energy Commission, Clinton Laboratories - 1943 - 6 pages
Temperature-viscosity measurements in the system CaO-SiO2and CaO-SiO2-CaF2 by C. H. Herty - 1934 - 31 pages
Ten-year ground exposure of composite materials used on the Bell model 206L helicopter flight service program by Donald J. Baker, Langley Research Center - 1994 - 57 pages
Tensile and creep properties of titanium-vanadium, titanium-molybdenum, and titanium-niobium by Hugh R. Gray, Lewis Research Center - 1975 - 28 pages
Tensile behavior of boron-filament-reinforced epoxy rings and belts by Robert M. Baucom, Langley Research Center, United States. National Aeronautics and Space Administration - 1969 - 29 pages
Tensile behavior of unnotched and notched tungsten-copper laminar composites by Charles A. Hoffman, John W. Weeton, Lewis Research Center, United States. National Aeronautics and Space Administration - 1976 - 33 pages
Tensile creep of boron/epoxy and boron/epoxy-reinforced 7075-T6 aluminum alloy by Daniel J. Chwirut, Langley Research Center - 1972 - 57 pages
Tensile creep of boron/epoxy and boron/epoxy-reinforced 7075-T6 aluminum alloy by Daniel J. Chwirut, Langley Research Center - 1972 - 57 pages
Tensile failure criteria for fiber composite materials by B. Walter Rosen, Carl H. Zweben, Materials Sciences Corporation - 1972 - 162 pages
Tensile properties and creep strength of three aluminum alloys exposed up to 25,000 hours at 200 ̊to 400 ̊F (370 ̊to 480 ̊K) by Dick M. Royster, Langley Research Center, United States. National Aeronautics and Space Administration - 1969 - 42 pages
Tensile properties from room temperature to 1315 ̊C of tungsten-lined tantalum-alloy (T-111) tubing fabricated by hot isostatic pressing by Robert J. Buzzard, Robert R. Metroka, Lewis Research Center - 1974 - 18 pages
Tensile properties of irradiated thorium by A. L. Bement (Jr.), Hanford Atomic Products Operation. Hanford Laboratories Operation, Hanford Works, U.S. Atomic Energy Commission, United States. Energy Research and Development Administration, United States. National Bureau of Standards. Fracture and Deformation Division, United States. Dept. of Energy. Office of Fusion Energy, United States. National Bureau of Standards - 1960 - 34 pages
Tensile properties of soft rubber compounds at temperatures ranging from -700 to +1470 C. by Rees Ferneau Tener - 1928 - 1 pages
Tensile properties of titanium electrolytically charged with hydrogen by Robert J. Smith, Dumas A. Otterson, Lewis Research Center, United States. National Aeronautics and Space Administration - 1971 - 15 pages
Tensile properties to 650 ̊C and deformation structures in a precipitation-strengthened titanium-aluminum alloy by Madan G. Mendiratta, Lewis Research Center - 1973 - 23 pages
Tensile strength comparison between presoldered and postsoldered joints by J. J. Luc Monday, University of Michigan. School of Dentistry - 1981 - 202 pages
Tensile strength comparison between presoldered and postsoldered joints by J. J. Luc Monday, University of Michigan. School of Dentistry - 1981 - 202 pages
Tensile strength of simulated and welded butt joints in W-Cu composite sheet by Thomas J. Moore - 1994 - 27 pages
Tensile strength of thin gold and silver films obtained by bulging techniques by Severino Martinez - 1956 - 108 pages
Tensile stress-strain behavior of flexibilized epoxy adhesive films by William Turner Simpson, V. R. Soper - 1970 - 12 pages
Tensile testing of thin films by D. T. Read - 1997 - 87 pages
Tension and compression tests of pure bismuth by A. U. Seybolt, Los Alamos National Laboratory, U.S. Atomic Energy Commission - 1946 - 3 pages
Tenth International Congress on Glass by Yōgyō Kyōkai (Japan), International Commission on Glass - 1974
Tenth International Congress on Glass by Yōgyō Kyōkai (Japan), International Commission on Glass - 1974
Tenth World Conference on Non-Destructive Testing, Moscow 1982 - 1982
Ternary Alloys by G. Petzow, G. Effenberg - 1995 - 484 pages
Ternary alloys by G. Petzow - 1994 - 586 pages
Ternary alloys by G. Petzow - 1994 - 586 pages
Ternary non-silicate glasses by Oleg Vsevolodovich Mazurin, Marina Vladimirovna Strelʹt︠s︡ina, Tatʹi︠a︡na Pavlovna Shvaĭko-Shvaĭkovskai︠a︡ - 1991 - 991 pages
Ternary silicate glasses by Oleg Vsevolodovich Mazurin, Marina Vladimirovna Strelʹt︠s︡ina, Tatʹi︠a︡na Pavlovna Shvaĭko-Shvaĭkovskai︠a︡ - 1987 - 1110 pages
Test and analysis of Celion 300/PMR-15, graphite/polyimide bonded composite joints by J. B. Cushman, S. F. McCleskey, S. H. Ward, Langley Research Center, United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch, Boeing Aerospace Company - 1983 - 67 pages
Test and analysis of Celion 3000/PMR-15, graphite/polyimide bonded composite joints: Summary by J. B. Cushman - 1983 - 75 pages
Test engineers' handbook - 1941 - 112 pages
Test methods for composite materials by Donald Frederick Adams - 1988 - 162 pages
Test methods for compression members by American Society for Testing and Materials. Committee E-1 on Methods of Testing, Column Research Council (U.S.) - 1967 - 213 pages
Test methods for high temperature materials characterization by Southern Research Institute (Birmingham, Ala.), C. D. Pears - 1979 - 311 pages
Test of a quarter-scale reinforced concrete voided slab bridge by Gordon Elliott, L. A Clark, R. M Symmons, Cement and Concrete Association - 1979 - 40 pages
Test report- direct and indirect lightning effects on composite materials by R. W. Evans, George C. Marshall Space Flight Center, Tec-Masters, Inc - 1997 - 92 pages
Testing and characterization of powders and fine particles by John K. Beddow, T. P. Meloy - 1980 - 195 pages
Testing and characterization of powders and fine particles by John K. Beddow, T. P. Meloy - 1980 - 195 pages
Testing and inspection levels for hot-mix asphaltic concrete overlays by Jeffrey S. Russell, National Research Council (U.S.). Transportation Research Board, American Association of State Highway and Transportation Officials, National Cooperative Highway Research Program - 2001 - 128 pages
Testing hardened concrete by V. M. Malhotra - 1976 - 188 pages
Testing hardened concrete by V. M. Malhotra - 1976 - 188 pages
Testing methods and techniques by United States. National Aeronautics and Space Administration - 1974 - 24 pages
Testing methods and techniques by United States. National Aeronautics and Space Administration. Technology Utilization Office - 1970
Testing methods and techniques; quality control and nondestructive testing by United States. National Aeronautics and Space Administration, United States. Small Business Administration - 1971 - 27 pages
Testing of engineering materials by Carl William Muhlenbruch - 1944 - 200 pages
Testing of organic coatings by Norman I. Gaynes - 1977 - 275 pages
Testing of polymers - 1969 - 480 pages
Tests of eighteen concrete columns reinforced with cast iron by John Tucker, J. Glenn Bragg - 1919 - 38 pages
Tests of flexible gas tubing by Russell Smith McBride, Walter Matho Berry, Ellsworth Francisco - 1919 - 37 pages
Tests of large bridge columns by John Howell Griffith, J. Glenn Bragg - 1918 - 139 pages
Tests of materials by Lloyd's Register of Shipping (Firm : 1914- ) - 1924 - 121 pages
Tests of strength of roof supports used in anthracite mines of Pennsylvania by George Samuel Rice, United States. Bureau of Mines - 1929 - 44 pages
Tests of wood preservatives by Howard Frederick Weiss, Clyde Harry Teesdale - 1915 - 20 pages
Text-book on the strength of materials by Stephen Elmer Slocum - 1906
Texture and the properties of materials by G. J. Davies - 1976 - 326 pages
Texture and the properties of materials by G. J. Davies - 1976 - 326 pages
Textures in materials research by R. K. Ray, Dr. A. K. Singh - 1999 - 478 pages
Textures of materials - 1996 - 1511 pages
Textures of materials - 1996 - 1511 pages
Textures of materials - 1978
Textures of materials - 1978
Textures of materials : ICOTOM 13 - 2002 - 1794 pages
Textures of materials : ICOTOM 14 by Paul van Houtte, Leo Kestens - 2005 - 1712 pages
Texturing and residual stress in metals as a result of sliding by Donald R. Wheeler, Lewis Research Center - 1974 - 14 pages
Texturing in metals as a result of sliding by Donald R. Wheeler, Donald H. Buckley, Lewis Research Center - 1973 - 13 pages
The "R.I.W." book by Toch Brothers - 1908 - 131 pages
The accuracy of industrial ceramic analysis by Harry Bennett, R. A Reed - 1973 - 26 pages
The action of sodium hydroxide melts on alloys of nickel, molybdenum, and iron at 815° C by G. P. Smith, E. E. Hoffman, Oak Ridge National Laboratory. Metallurgy Division, Union Carbide Nuclear Company, U.S. Atomic Energy Commission - 1956 - 7 pages
The action of sulfur monochloride on rubber by Phillip Allen Miller - 1936 - 506 pages
The advanced materials and processing program and the restructuring of materials science and technology in the United States by Julia Randall Weertman, National Research Council (U.S.). Solid State Sciences Committee, National Research Council (U.S.). Board on Physics and Astronomy, National Research Council (U.S.). Commission on Physical Sciences, Mathematics, and Applications, National Research Council (U.S.). National Materials Advisory Board, National Research Council (U.S.). Commission on Engineering and Technical Systems - 1995 - 28 pages
The advanced materials and processing program and the restructuring of materials science and technology in the United States by Julia Randall Weertman, National Research Council (U.S.). Solid State Sciences Committee, National Research Council (U.S.). Board on Physics and Astronomy, National Research Council (U.S.). Commission on Physical Sciences, Mathematics, and Applications, National Research Council (U.S.). National Materials Advisory Board, National Research Council (U.S.). Commission on Engineering and Technical Systems - 1995 - 28 pages
The African rubber industry and Funtumia elastica ("kickxia") by Cuthbert Christy - 1911 - 252 pages
The African rubber industry and Funtumia elastica ("kickxia") by Cuthbert Christy - 1911 - 252 pages
The Alloa glass work by John Lees Carvel - 1953 - 102 pages
The alloys of iron and copper by James Lawrence Gregg, Boris N. Daniloff, Engineering Foundation (U.S.), Battelle Memorial Institute - 1934 - 454 pages
The alloys of iron and tungsten by James Lawrence Gregg, Engineering Foundation (U.S.), Battelle Memorial Institute - 1934 - 511 pages
The alloys of iron and tungsten by James Lawrence Gregg, Engineering Foundation (U.S.), Battelle Memorial Institute - 1934 - 511 pages
The analysis of ashes and alloys by L. Parry - 1908 - 143 pages
The analysis of rubber and rubber-like polymers by William Charles Wake - 1969 - 228 pages
The anodic oxidation of aluminium and its alloys by Alexander Jenny - 1940 - 231 pages
The application of a nominal 48 WT % U-AL alloy to plate-type aluminum research reactor fuel elements by W. C. Thurber, J. H. Erwin, R. J. Beaver, Oak Ridge National Laboratory Metallurgy Division, U.S. Atomic Energy Commission - 1958 - 34 pages
The application of acoustic emission technique to fatigue crack measurement by Jag J. Singh, William T. Davis, John H. Crews, Langley Research Center - 1974 - 40 pages
The application of radiant heat to metal finishing by J. H. Nelson, H. Silman - 1945 - 91 pages
The application of radiant heat to metal finishing by J. H. Nelson, H. Silman - 1945 - 91 pages
The application of rubber impression material to crown and bridge prosthesis by Mahmoud S. El Hadary, University of Michigan. School of Dentistry - 1957 - 102 pages
The application of shape memory alloys in medicine by Ian P. Lipscomb, L. D. M. Nokes - 1996 - 153 pages
The application of some inequalities in the theory of surfaces by Kermit Howard Carlson - 1954 - 148 pages
The applied science of rubber - 1961 - 1191 pages
The artificial rubber industry in the United States by Stanley Eugene Boyle - 1958 - 864 pages
The artificial rubber industry in the United States by Stanley Eugene Boyle - 1958 - 864 pages
The basics of thin films by James F. Smith (Dr), Materials Research Corporation - 1980 - 43 pages
The behavior of engineering metals by Horace Wadsworth Gillett - 1961 - 395 pages
The behavior of stanchions bent in single curvature by J. W. Roderick - 1945 - 16 pages
The binding energy of carbon on Ni (100) and a stepped nickel surface from equilibrium segregation studies by Lawrence Clair Isett - 1975 - 432 pages
The bond strength of aluminium alloy reinforcement bars by J. B. Read, Cement and Concrete Association - 1964 - 16 pages
The burning rate of natural graphite by Glen Dale Coe - 1943 - 9 pages
The buying and selling of ores and metallurgical products by Charles Herman Fulton - 1915 - 43 pages
The calculation of elevated-temperature cyclic life considering low-cycle fatigue and creep by David A. Spera, United States. National Aeronautics and Space Administration, Lewis Research Center - 1969 - 23 pages
The Canning handbook - 1982 - 1094 pages
The carbon-carbon assessment program by Eric M Ross - 1974 - 170 pages
The Characterization of linear polyethylene SRM 1475 by Institute for Materials Research (U.S.), United States. National Bureau of Standards - 1972 - 34 pages
The characterization of wood-preserving creosote by physical and chemical methods of analysis by F. H. Max Nestler, Forest Products Laboratory (U.S.), United States. Forest Service - 1974 - 31 pages
The chemical analysis of silica sands by British Industrial Sand Co., Ltd - 1958 - 19 pages
The chemical durability of glass by International Commission on Glass. Sub-committee AII. - 1979
The chemical durability of glass by International Commission on Glass. Sub-committee AII. - 1973
The chemistry and technology of rubber latex by Colin Falconer Flint, Georges Génin - 1938 - 715 pages
The chemistry of India rubber by Carl Otto Weber - 1912 - 314 pages
The chemistry of India rubber by Carl Otto Weber - 1903 - 314 pages
The chemistry of india rubber by Carl Otto Weber - 1902 - 314 pages
The chemistry of rubber manufacture by Lothar E. Weber - 1926 - 372 pages
The chemistry of the rubber industry by Harold Edwin Potts - 1912 - 153 pages
The choice of the proper refractory for the casting of high melting electropositive metals by Leo Brewer, University of California, Berkeley. Radiation Laboratory - 1950 - 20 pages
The company and the man by Goodyear Tire and Rubber Company - 1927 - 62 pages
The composition, properties, and testing of printing inks by United States. National Bureau of Standards - 1915 - 35 pages
The composition, properties, and testing of printing inks by United States. National Bureau of Standards - 1915 - 35 pages
The consumer and flame retardant sleepwear by Laughlin Kenneth C. (Kenneth Clifford) - 1975 - 17 pages
The corrosion of aluminium and some aluminium alloys in high-temperature water by W. Uhlmann - 1963
The corrosion resistance of tin and tin alloys by Sidney Charles Britton - 1952 - 77 pages
The cost of paper by Eugene H. Munday - 1875 - 36 pages
The CRC materials science and engineering handbook by James F. Shackelford, William Alexander - 1992 - 841 pages
The cultivation of rubber as an investment by Sir Herbert Wright - 1906 - 61 pages
The deposition of vacuum coatings by means of electron bombardment by V. K. Pereverzev, United States. National Aeronautics and Space Administration - 1963 - 21 pages
The design of single span, two-hinged rigid frames of prestressed concrete by Nicolas Boris Rosania - 1955 - 166 pages
The detection of fatigue cracks by nondestructive testing methods by Ward D. Rummel, Martin Marietta Aerospace. Denver Division - 1974 - 157 pages
The determination of dynamic properties of polymers and composites by Bryan Eric Read, Gregory Donald Dean - 1978 - 207 pages
The determination of the oxygen content of metals by the carbon monoxide method by D. Lipkin, M. L. Perlman, U.S. Atomic Energy Commission - 1944 - 15 pages
The determination of total sulphur in India rubber by Campbell Easter Waters, John Betley Tuttle - 1913 - 9 pages
The development and application of very strong steels by E. Ineson, Great Britain. Ministry of Aviation - 1966 - 82 pages
The developments of sendust and other ferromagnetic alloys by Tatsuji Yamamoto - 1980 - 319 pages
The diffusion of cobalt in pure delta iron by Richard J. Borg, David Y. F. Lai, Oscar H. Krikorian, Lawrence Livermore Laboratory, University of California, Berkeley. Lawrence Radiation Laboratory - 1962 - 11 pages
The diffusion of nonvolatile metallic elements in graphite by J. R. Wolf, D. R. McKenzie, R. J. Borg, Lawrence Livermore Laboratory, University of California, Berkeley. Lawrence Radiation Laboratory - 1964 - 61 pages
The directed vapor deposition of rhodium using the vacuum arc by Richard Joseph Clark - 1966 - 24 pages
The dislocation structure and slip systems in [beta]-NiAl single crystals deformed in high temperature creep by Joze Bevk - 1968 - 108 pages
The durability of paints by Kenneth Kasson Mao - 1930 - 173 pages
The dynamics of a fatigue-testing machine by Sergeĭ Vladimirovich Serensen, Mikhail Ėrnestovich Garf, Vasiliĭ Aleksandrovich Kuzʹmenko - 1970 - 369 pages
The economic characteristics of rubber tire production by Leonard Eldon Carlsmith - 1935 - 229 pages
The economics of the printing ink industry by Robert Sancier Aries, Anthony George Nickolaus - 1950 - 108 pages
The effect of casting geometry on white iron casting defects by John Marshall Mertz - 1969 - 164 pages
The effect of chemical environments on the tensile strength of rocks as determined from the ring test by Kelly Charles Strebig - 1967 - 104 pages
The effect of chills on the microstructure of heavy section ductile iron by Daniel Harrison Withey - 1969 - 160 pages
The effect of chromium and molybdenum on the recovery behavior of "interstitial-free" iron by Joseph Jay Jackson - 1969 - 178 pages
The effect of cobalt content in U-700 type alloys on degradation of aluminide coatings by I. Zaplatynsky - 1985 - 15 pages
The effect of cold work followed by annealing upon the physical properties of 0.22% carbon-0.89% manganese steel by Robert Louis Geruso - 1930 - 48 pages
The effect of cold work followed by annealing upon the physical properties of 0.22% carbon-0.89% manganese steel by Robert Louis Geruso - 1930 - 48 pages
The effect of cold work followed by annealing upon the physical properties of 0.22% carbon-0.89% manganese steel by Robert Louis Geruso - 1930 - 48 pages
The effect of composition on the mechanism of stress-corrosion cracking of titanium alloys in N2O4, and aqueous and hot-salt environments by J. D. Boyd - 1971 - 68 pages
The effect of composition on the mechanism of stress-corrosion cracking of titanium alloys in N2O4, and aqueous and hot-salt environments by J. D. Boyd - 1971 - 78 pages
The effect of composition on the mechanism of stress-corrosion cracking of titanium alloys in N2O4, and aqueous and hot-salt environments by J. D. Boyd - 1971 - 68 pages
The effect of composition on the mechanism of stress-corrosion cracking of titanium alloys in N2O4, and aqueous and hot-salt environments by J. D. Boyd, United States. National Aeronautics and Space Administration - 1970
The effect of configuration on strength, durability, and handle of Kevlar fabric-based materials by L. L. Rueter, J. B. Munson, United States. National Aeronautics and Space Administration, Langley Research Center, Sheldahl, Inc - 1977 - 60 pages
The effect of core aggregates on shrinkage defects in white iron castings by Peter Edward Sohlden - 1968 - 194 pages
The effect of deleterious substances on the compressive strength of concrete by Henry Lewis Hille - 1937 - 150 pages
The effect of different natural flake graphite additions on the high-temperature properties of a dolomite-carbon refractory by James Philip Bennett, United States. Bureau of Mines - 1987 - 12 pages
The effect of edge preparation on coating life by Leslie W. Sandor, United States. Maritime Administration - 1983 - 89 pages
The effect of electric currents on alkali silica reaction in concrete by Kumar C. Natesaiyer - 1990 - 432 pages
The effect of environment on the fatigue strengths of four selected alloys by T. R. Shives, J. A. Bennett - 1965 - 22 pages
The effect of environment on the fracture of a high strength steel, H-11 by André Maurice Willner - 1963 - 148 pages
The effect of ferromagnetism on the elastic and plastic properties of metals at elevated temperatures by Kenneth Thomas Kamber - 1963 - 188 pages
The effect of geometry and flow through on the solidification time of white cast iron and manganese bronze castings by David Lee LeMahieu - 1970 - 146 pages
The effect of interfiber distance and temperature on the critical aspect ratio in composites by Robert W. Jech, Robert A. Signorelli, United States. National Aeronautics and Space Administration, Lewis Research Center - 1968 - 24 pages
The effect of interstitial atom-dislocation interactions on the deformation behavior of some body-centered-cubic metals by Benjamin Abbott Wilcox - 1962 - 326 pages
The effect of long-range order on the elastic and plastic properties of alloys at elevated temperatures by John Anthony Hren - 1962 - 274 pages
The effect of manganese and silicon content on the hot workability of type 304 stainless steel containing 2 w/o boron by L. C. Hymes, N. Balai, Argonne National Laboratory. Reactor Engineering Division, U.S. Atomic Energy Commission - 1961 - 12 pages
1 2 3 4