A boundary element method for two-dimensional contact problems
This book is an attempt to demonstrate the power and versatility of Boundary Element Method (BEM) in solving the complicated contact problem. The basic concepts of contact are explained followed by the derivation of analytical and numerical boundary element formulation for two-dimensional elastic contact problems. The formulation is intended for a general case of contact, so that all different geometries in contact with different frictional conditions can be analyzed. The temperature changes and body forces are also included in the formulations.
What people are saying - Write a review
We haven't found any reviews in the usual places.
Workplace Hazard Control
Occupational Injury and Disease
Hazard Evaluation and Control
11 other sections not shown
Other editions - View all
A-weighted absorbed absorption ACGIH acid activated carbon adsorption ANSI ASHRAE attenuation average barrier beam byssinosis calculated carbon chemical concentration concrete contaminant damping decibel density devices diameter dose duct dust effect efficiency emission energy Engineering environment equation equipment estimated example exposure factor Figure flow rate frequency function guard hazard Health heat stress height hood increase industrial isolation laser loss coefficient lung cancer machine material maximum measured metal miners NCRP neutrons NIOSH noise occupational operation OSHA oxide particle photon pollutant pressure drop radiation range reduce rH rH shield Skin solution sound level sound power level sound pressure level specific standard Sulfuric acid surface Table temperature thermal thickness Threshold limit values vapor velocity venturi vibration volumetric flow rate wavelength welding workers workplace x-ray