What people are saying - Write a review
We haven't found any reviews in the usual places.
Other editions - View all
acute corner ball Balusters bevel Black-walnut disk bowl calipers cherry disk concave curves cone-centre cone-pulley convex curves cup-centre cut is started cut the convex cutting edge cutting tool cylinder 3 inches dead-centre diam dimensions shown dotted lines eter EXERCISE Material.—Gum EXERCISE Material.—Poplar Exercise.—To cut Exercise.—To turn face-plate finish fork-centre form and dimen form shown groove head-stock hole i-inch skew chisel inches in diameter inside lathe left-hand lines in Fig live-spindle manner shown mark material being operated Material.—Cherry Material.—Gum or cherry Material.—Poplar or pine nearly obtuse corner parting-tool piece position shown principal dimensions raise the handle recess rection remove revolving right-hand side round the fillet scraping tool screws SEVENTH EXERCISE sharpened shears shellac shown in Fig similar sions shown SIXTH EXERCISE smooth cylinder sphere spindle straight SUPPLEMENTAL EXERCISE surface tail-stock end tee rest templet thick Turn a smooth Turn the material Varnish and polish wood wood-turner wooden chuck
Page 11 - The chisel is held in the right hand, and the fingers of the left hand used to steady it.
Page 31 - The curve marked [b] is cut in a similar manner, the direction of the cut, however, being from left to right instead of from right to left, as here the cut starts against the shoulder on the left-hand side and finishes against the one on the right-hand side.