Build a Remote-controlled Robot
This volume focuses entirely on building the inexpensive, remote-controlled robot, The Questor. The book is illustrated with step-by-step, detailed photographs of each stage of the assembly process. No advanced electronic or programming skills are required, making the book suitable for first-time experimenters. The emphasis is on the techniques needed to build the robot, rather than on the theory of robot design.
Other editions - View all
1/4-inch-diameter holes 6-volt batteries aluminum angle assembled attach barrier strips black wire body panels bolt bow tie brackets castor wheel charging plugs components connecting pieces control sticks cotter pin cover cutting guide DPDT drill the holes Drilling and cutting drink dispenser edge fiberglass frame front function fuse holder held in place horn inches inside installed leaf switches List AMOUNT ITEM located lockwasher set lower framework mark and drill minum motherboard motorized wheels mounting holes mounting tabs negative power grid numbers on/off switch plastic plywood positive power grid potentiometers pots predrilled holes pump Questor's arms Questor's body Questor's construction Questor's framework Questor's head Questor's remote control rear panel red wire remote control system remove rivet robot's body serving tray sheet metal screws showbot shown in Fig shows side SPST switch switch barrier temporary control box transmitter tubing upper framework vacuum cleaner washer wireless wiring diagram