CATIA V5 FEA Tutorials: Release 19

Front Cover
SDC Publications, 2010 - Computers - 581 pages
1 Review

The objective of this tutorial book is to expose the reader to the basic FEA capabilities in CATIA V5 Release 19. The chapters are designed to be independent of each other allowing the user to pick specific topics without the need to go through the previous chapters. However, the best strategy to learn is to sequentially cover the chapters.

In this workbook, the parts created in CATIA are simple enough they can be modeled with minimal knowledge of this powerful software. The reason behind the simplicity is not to burden the reader with the CAD aspects of the package. However, it is assumed that the user is familiar with CATIA V5 Release 19 interface and basic utilities such as pan, zoom, and rotation.

The tutorials are based on release 19; however, other releases can also be used with minor changes. Typically, the differences are not even noticed by a beginner.

 

What people are saying - Write a review

User Review - Flag as inappropriate

kkkkkk

Contents

Introduction
v
Analysis of a Bent Rod with Solid Elements
2-1
Axially Loaded Block with Stress Concentration
3-1
Stress Analysis of a Rotating Disk
4-1
Deformation of an Ibeam under Selfweight
5-1
Cclamp Deformed with Enforced Displacement
6-1
FEA Modeling of the Bent Rod with Beam Elements
7-1
Beam Elements under Enforced Displacement
8-1
Analysis of a Tensile Specimen as an Assembly
16-1
Analysis of a Fastened Assembly
17-1
Thermal Stresses in a Bimetallic Strip
18-1
Hybrid Mesh Analysis
19-1
Spring Elements
20-1
Adaptive Refinement
21-1
Free Vibration of a Simply Supported Beam
22-1
Buckling Analysis
23-1

Bending of a Notched Specimen with Smooth Virtual Part
9-1
Analyzing a Loaded Bracket with Triangular Shell Elements
10-1
Modeling Mismatch in Shell Thickness and Surface Mesher
11-1
Analysis of Thin Walled Pressure Vessel using Shell Elements
12-1
Using the Surface Mesher to Simplify Geometry
13-1
FE Model of a BearingShaft Assembly using Analysis Connection
14-1
Shrink Fit Analysis
15-1
A Simple Spot Weld Analysis
24-1
Defining Restraints or Loads on Patches
25-1
Limited Hexahedral Element Capabilities
26-1
Frequency Response Analysis of a Simply Supported Beam
27-1
Miscellaneous Comments
27-23
Copyright

Other editions - View all

Common terms and phrases

Bibliographic information