Effect of geometry on hydrodynamic film thickness
David E. Brewe, Bernard J. Hamrock, Christopher M. Taylor, Lewis Research Center, University of Leeds, United States. National Aeronautics and Space Administration. Scientific and Technical Information Office
National Aeronautics and Space Administration, Scientific and Technical Information Office, 1978 - Science - 33 pages
What people are saying - Write a review
We haven't found any reviews in the usual places.
additional geometry effect average surface velocity AVRADCOM Research ball-on-plate configuration boundary conditions resulted cavitation boundary center of contact central film thickness conforming groove conjunction fully Contact geometry Dalmaz ref determined numerically dimensionless central minimum dimensionless coordinate dimensionless film thickness dimensionless load dimensionless speed EFFECT OF GEOMETRY effective radius eld boundary conditions erf eld boundary exponent FORMAT(1H fully flooded condition half-Somm erf eld Hamrock Hmin hydrodynamic film separating inlet condition integration domain Isobar isothermal hydrodynamic film Kapitza's analysis Kapitza's classical solution KMAX Lewis Research Center loss in load lubricant i. e. minimum film thickness NASA NHOLD=N parameter pressure distribution pressure peak Pressure profiles Pressure-viscosity effects PRMX radius of curvature range of HQ/WG ratio of dimensionless reduced hydrodynamic lift Reynolds boundary conditions rigid solids rolling direction separating two rigid shown in figure solids was investigated speed to dimensionless thickness was varied three radius ratios University of Leeds viscosity