GB 19755-2016: Translated English of Chinese Standard. GB19755-2016: Technical requirements and measurement methods for emissions from light-duty hybrid electric vehicles
https://www.chinesestandard.net, 21 Mei 2017 - 54 halaman
This Standard specifies the measurement methods and technical requirements for emission pollutants, double idle speed emission pollutants, crankcase pollutants, evaporative pollutants, durability of pollutant control device and on-board diagnostics (OBD) system of light-duty hybrid electric vehicles with spark-ignition engines at room temperature and low temperature.
Apa yang dikatakan orang - Tulis resensi
Kami tak menemukan resensi di tempat biasanya.
Requirements and tests
Annex B normative Type test results
informative Schematic diagram of state of charge of energy storage
30 minutes power acceleration smoke test according to GB/T battery battery management system carbon tank carried out according Carry out Carry catalytic converter charging hybrid electric compression-ignition condition B test deterioration factor double idle speed driving mode electric vehicles NOVC electrical energy balance electricity balance emission of pollutant emission pollutants emissions from light-duty energy storage device free acceleration smoke function of manual g/km gear hybrid electric vehicles Hybrid mode idle speed test ignition Label and type light-duty hybrid electric manual selection manufacturer’s maximum 30 minutes Measured value measurement methods measurement of emission methods for emissions minimum monitored by OBD motor OBD system off-board vehicle charging off-vehicle charging on-board diagnostics oxygen sensor pollutant control device r/min relevant specifications selection of driving sensor spark-ignition specifications of GB specified in GB supercapacitor test according test cycle test result two-type type I test type test vehicle charging hybrid Vehicle pretreatment vehicle running Yes/No2