GB 20075-2020 Translated English of Chinese Standard (GB 20075-2020, GB20075-2020): Passenger handholds and footrests on motorcycles
https://www.chinesestandard.net, 2023 M10 20 - 13 pages
This Standard specifies the technical requirements and test methods for passenger handholds (handhold straps, hand-grip bars) and footrests for motorcycles and mopeds (hereinafter referred to as "motorcycles"). This Standard applies to two-wheeled motorcycles, three-wheeled motorcycles with sidecars, and right three-wheeled motorcycles with saddles.
able to withstand additional devices affect the test Appendix applied tensile force applied vertically bars A handle-like Confirmation of sample Diagram of Tensile Downward vertical 1700N driver and passengers enterprise technical documents fastening of samples Figure A.1 footrest or pedal force is statically gauge to ensure GB/T greater than 2MPa handhold strap handholds and footrests handle-like device horizontal plane Installation and fastening judged as qualified judged as unqualified Judgment of test Lateral Upward vertical located directly longitudinal center plane maximum pressure maximum tensile force meet the requirements passenger handholds reaches or exceeds relevant enterprise technical requirements of relevant sample status Schematic Diagram shown in Figure Single hand-grip bars slowly increased Standard statically applied tensile force reaches Tensile Force Test tensile force value terms and definitions Test Methods Test procedures test sample vehicle upward tensile force Upward vertical 2000N vehicle is placed vehicle is tightened vertical upward tensile withstand a vertical