GB/T 13594-2003 Translated English of Chinese Standard (GB/T13594-2003, GBT 13594-2003): Antilock braking performance and test procedure for motor vehicles and their trailershttps://www.chinesestandard.net, 2022 M08 21 - 39 pages This standard specifies the braking performance and test methods, which are required for vehicles equipped with antilock braking systems. This standard applies to the categories M, N motor vehicles and category O trailers, which are equipped with antilock braking systems. |
Contents
4 | |
Scope 2 Normative references 3 Definitions 4 Categories 5 Performance requirements and test methods | 7 |
MODIFY the test method Chapter 6 of the 1992 edition E 7 of this edition | 16 |
Appendix A Normative Appendix B Normative Utilization rate of adhesion coefficient Appendix C Normative Braking performance on road paveme... | 26 |
Common terms and phrases
5th braking adhesion coefficient kH air brake allowed to lock antilock braking system arithmetic mean bisectional road pavement braking force braking strength zAL category 3 antilock control mode directly controlled wheels Dongfeng Motor Corporation driving dynamic axle load energy storage device equipped with antilock equipped with category FMnd front axle full cycle full force full stroke fully loaded vehicle high adhesion coefficient initial speed kH/kL klock km/h kpeak low adhesion coefficient maximum braking strength maximum value meet all relevant meet the requirements motor vehicles N2 and N3 N3 vehicles normal static reaction rate of adhesion rear axle relevant performance requirements requirements of GB road pavement test semi-trailer sensor service brake specified static reaction force technical department three t values total normal static trailer brakes trailer's antilock braking trailer's energy storage unbraked utilization rate vehicle combination vehicle is stationary vehicle speed vehicles equipped vmax wheels are allowed yellow alarm zRAL value