GB/T 18487.2-2017 Translated English of Chinese Standard. GB/T18487.2-2017, GB33460: Electric vehicle conductive charging system - Part 2: EMC requirements for off-board electric vehicle supply equipment
https://www.chinesestandard.net, 2018 M01 26 - 42 pages
This part of GB/T 18487 specifies the electromagnetic compatibility requirements of the electric vehicle power supply equipment for electrical vehicle off-board conductive charging (hereinafter referred to as the power supply equipment). The maximum rated voltage of the power supply of the power supply equipment is 1000 VAC or 1500 VDC, the maximum rated output voltage is 1000 VAC or 1500 VDC.
Power supply equipment configuration
Test results and test reports
Normative Surge and electrical fast transient burst test
AC coupling AC or DC AC power AC/DC Appendix Artificial network Averagevalue dB charging cable charging mode CISPR Class A power clause conducted disturbances induced CPT port DC power supply Electrical fast transient Electromagnetic compatibility emission requirements equipment under test fast transient burst Figure A.1 ground plane harassment voltage limits immunity test GB/T Immunity to conducted induced by RF kHz B Standby kHz B Surge kV Electrical fast load low voltage AC magnetic field manufacturer's functional specifications measurement techniques mode and charging ns 5/50 Repeat off-board output port directly connected port power power port power supply equipment PSTN Quasi-peak dB Radiation harassment Rated power Repeat 100 frequency sag and short shown in Figure signal/control ports Standby mode Surge immunity Table terminal test arrangement Testing and measurement total cable length Tr/Th transient burst immunity voltage applied step Voltage sag µs kV