GB/T 29511-2013: Translated English of Chinese Standard. (GBT 29511-2013, GB/T29511-2013, GBT29511-2013): Protective clothing - Chemical protective clothing against solid particulates
https://www.chinesestandard.net, 2020 M04 11 - 27 pages
This Standard specifies the gradation, basic performance requirements, test methods and identification of chemical protective clothing against solid particulates. This Standard applies to the protective clothing that is required for the skin protection of workers who are exposed to chemical contamination of particulates in the workplace environment.
What people are saying - Write a review
We haven't found any reviews in the usual places.
According to Formula according to Table additional Appendix average value body breaking strength calculate chemical protective clothing Chest clean air concentration of NaCl connected detection Determination document ensure fabric penetration fabric puncture resistance fixed flexural failure resistance flow graded and identified identified according inside Knee Knee Chest L/min less lower than grade manufacturer's instructions measure the concentration measured object measured protective clothing NaCl particle aerosol Note packaging particle aerosol concentration particle detector penetration efficiency percentage perform the fabric performs the test piece of measured pieces of protective pipeline pressure protective clothing fabric provisions range Refer requirements resistance test resistance to water respectively sampling order sampling point sampling probe Seam solid particulates specified in GB/T speed Squat stable Stand standard Table A.1 test action Test method test position test results test room environment tested according Textiles total inward leakage Vacuum pump Walk water penetration wear