GB/T 36123-2018: Translated English of Chinese Standard. (GBT 36123-2018, GB/T36123-2018, GBT36123-2018): Technical requirements for gas leakage alarm device of gas vehicle
https://www.chinesestandard.net, 27.10.2018 - 19 Seiten
This Standard specifies the terms and definitions, technical requirements, test method, inspection rules, instructions, marking, packaging, transport and storage of gas leakage alarm device of gas vehicle. This Standard applies to gas fuel (NG, PG) leakage alarm device using the point type gas concentration testing principle, which is installed and used in single-fuel, bi-fuel and dual-fuel gas vehicle, and oil-gas and gas-electric hybrid vehicle. This Standard can be referred to for leakage vehicle of other types of gas fuels.
Was andere dazu sagen - Rezension schreiben
Es wurden keine Rezensionen gefunden.
Terms and definitions
airflow velocity alarm device gives alarm device remain alarm setting value alarm value alarms or leakage Beijing combustible gas components of alarm Detector is tested device gives alarm device is tested difference between alarm disturbance resistance performance Electrical transient conduction Electromagnetic compatibility Electromagnetic disturbance resistance electrostatic discharge Enclosure protective performance exceed Exit-factory inspection functions predesigned gas vehicle give fault alarms give leakage alarm gives alarm signals High-concentration flooding leakage alarm device loads GB/T low-temperature measure its alarm measure the alarm Motor Corporation normal operating operating temperature performance Alarm device performance All components performance test point type gas power supply Power-on alarm required in 4.3 resistance performance Alarm Road vehicles Silicon poisoning resistance specified in GB/T Technology test Alarm device test chamber stabilize test Install detector test is carried test method specified tested as required type gas concentration value and alarm value of alarm voltage resistance test warning module Zhengzhou