GB/T 3880.3-2012: Translated English of Chinese Standard. (GBT 3880.3-2012, GB/T3880.3-2012, GBT3880.3-2012): Wrought aluminium and aluminium alloy plates, sheets and strips for general engineering - Part 3: Tolerances on forms and dimensions
https://www.chinesestandard.net, 12.09.2016 - 19 Seiten
This Part of GB/T 3880 specifies the tolerances on forms and dimensions of the wrought aluminium and aluminium alloy plates, sheets and strips for general engineering. This Part is applicable to the wrought aluminium and aluminium alloy rolled plates, sheets and strips for general engineering.
Was andere dazu sagen - Rezension schreiben
Es wurden keine Rezensionen gefunden.
Häufige Begriffe und Wortgruppen
aluminium alloy plates aluminium and aluminium clear indications cold-rolled plates consultation between supply content of Mn determined after consultation end portion refers following widths Thickness forms or contracts GB/T grade shall conform grades Hot-rolled plates greater than 1.8 high precision grade lengths of cold-rolled lengths of hot-rolled maximum content negative tolerances required negotiated order forms ordinary grade applies ordinary grades Hot-rolled party has special plates and sheets precision and ordinary precision grade needs Precision Grade Unit provisions in Table range of 300mm require the side required or determined sheets and strips sheets shall conform sheets The ordinary side curvature strips shall conform supply and requisitioning Table 12 Thicknesses of Cold-rolled tolerances on diagonals tolerances on dimensions Tolerances on forms tolerances on lengths Tolerances on thicknesses Tolerances on widths Type A alloys Type A Type wave heights Waviness of Plates widths of cold-rolled widths of hot-rolled widths of plates Wrought aluminium