GB/T 5072-2008: Translated English of Chinese Standard (GBT 5072-2008, GB/T5072-2008, GBT5072-2008): Refractories - Determination of cold compressive strengthThis standard specifies the definition, principle, equipment, sample, test procedure, result calculation and so on of the determination of cold compressive strength of refractories. |
Avis des internautes - Rédiger un commentaire
Aucun commentaire n'a été trouvé aux emplacements habituels.
Table des matières
3 | |
Method 2 Dense refractory materials compressive strength test method | 10 |
Appendix A Informative Clause number comparison between this standard | 17 |
Expressions et termes fréquents
5°C to dry Appendix APPLY load CALCULATE the cold Carbon paper mark center location Coarse particle brick cold compressive strength compressive strength test compressive surface cube cylinder Dense refractory materials Dense shaped refractory Determination of cold exceed feeler GB/T height measured information of unshaped Insulating refractory material insulating refractory products loading rate lower press plate mark of disqualified material equivalently adopts maximum load measurement points measurement range measuring the height Micrometer MPa/s number of samples number of test oven at 110 particle brick Figure PLACE the test product It refers qualified test specimen RECORD the maximum refractory material compressive Shaped insulating refractory shaped refractory products specimen is broken square edge standard AND ISO standard brick steel ruler strength test method technical content Test procedures test report Test specimen adapter Test with packing test without packing testing machine triangle plate unshaped material samples upper and lower upper press plate