GB/T 6728-2017: Translated English of Chinese Standard. (GBT 6728-2017, GB/T6728-2017, GBT6728-2017): Cold forming hollow sectional steel for general structure
https://www.chinesestandard.net, 2018 M08 10 - 29 pages
This Standard specifies the ordering content, classification, code, cross-section, dimension and permissible deviation, length and permissible deviation, shape, weight and permissible deviation, technical requirements and marking example of cold forming hollow sectional steel for general structure. This Standard is applicable to round, rectangular and square cold forming hollow sectional steel (hereinafter referred to as sectional steel) made of cold-rolled or hot-rolled steel plates, sheets and strips on continuous roll cold forming units. It is also applicable to continuous hot-dip plated sectional steel. However, it is not applicable to sectional steel made by drawing, stamping, bending, etc., and sectional steel made of galvanized steel plates, sheets and strips which are cold-formed and welded.
What people are saying - Write a review
We haven't found any reviews in the usual places.
area per unit characteristics shall comply cm4 mm cm3 cm4 Torsional constant cold forming hollow Cross-section inertia inertia Cross-section modulus Cross-sectional area cross-sectional dimension cross-sectional view curvature demand parties Dimension permissible deviation Elastic modulus exceed forming hollow sectional GB/T hollow sectional steel inertia cm4 Torsional inertia inertia modulus inertia modulus cm4 length and permissible length outside diameter measurement method method is shown millimeters Moment of inertia non-perpendicularity outer arc radius Plastic modulus Radius of Cross-section Radius of gyration Radius of inertia rectangular hollow sectional rectangular sectional steel relevant specifications Round sectional steel sectional steel Table short side shown in Figure side length Sidelength mm A B C D specifications of Table square or rectangular square sectional steel Standard steel is shown Surface area Table 2 continued Table A.1 Theoretical weight Torsional constant Key Torsional constant Table unit length Wall thickness weight and cross-sectional weight and permissible Weight per unit