Illustrated Catalogue of Machine Tools, Wood Working Machinery, Etc. for Manufacturing Plants and Machine Shops

Front Cover
Fairbanks Company, 1907 - Machine-tools - 613 pages

From inside the book

What people are saying - Write a review

User Review - Flag as inappropriate

Edited & on the Internet Archive with this title:
The Fairbanks Company : Catalogue Number 420 : Machine Tools, Wood Working Machinery, Etc. for Manufacturing Plants and Machine Shops

User Review - Flag as inappropriate

Pages are in reverse order, and very unreadable scans. Could be a lot better.

Other editions - View all

Common terms and phrases

Popular passages

Page 114 - well as the radius arm, and it is best to set the ends of work in line with bed at equal distance from center bolt. By shifting the link or block some, it will favor the radius arm and require
Page 282 - off) in any position and in very cramped places, as on board ship. etc. It can be readily operated in a space that is large enough to take the piston out of the cylinder. Many
Page 177 - many different points as there are depths to be drilled at one setting of the work.
Page 284 - the cylinder end clear for the facing arm, the other or opposite end of the bar being supported with the pin of the gland chuck or
Page 241 - to be made, when the cutter can be lowered and the cutting continued, guided by the pointer, thus leaving very little to
Page 486 - brought perfectly parallel to the guides on which the platen travels; after which the emery wheel
Page 69 - The index is nearly the full diameter of the turret and the lock bolt is placed
Page 282 - can be rebored in place in less time than they could be removed from fixed position, leaving all steam connections, holding-down
Page 284 - to screw out into the cylinder, the other set screwing toward .the center intended to fit into the groove of

Bibliographic information