Mastercam X2 Training Guide Lathe

Front Cover
Mastercam Training Books, Jan 1, 2007 - 339 pages
1 Review
 

What people are saying - Write a review

User Review - Flag as inappropriate

good for the peoples those who does't know about the master cam

Contents

Setting the Environment
11
Lesson 1
19
53
23
Geometry Creation
57
Lesson 3
95
Geometry Creation
100
Create the Geometry
101
Create the18 Degree Angle TASK 5 Create the Fillets Radius
107
Post and Create the CNC Code File
136
Lesson 4
139
Geometry Creation
144
Create the Geometry
145
Create the 1 5 Radius
148
Create the Chamfers
152
Save the Drawing
153
Toolpath Creation
154

Create the Chamfer
110
Save the Drawing
111
Toolpath Creation
112
Face the Front of the Part
118
Rough the Outside Diameters
120
Finish the Outside Diameters
123
Center Drill the 516 Hole TASK 13 Drill the 516 Hole
126
Tapthe3816Hole TASK 15 Cut off the Part
132
Verify the Toolpath TASK 17 Save the Updated MCX File
135
Define the Stock and Chuck Parameters TASK 8 Face the Front of the Part
160
Rough the Outside Diameters
161
Finish the Outside Diameters TASK 11 Cut the Groove
166
Cut the Thread TASK 13 Finish the Radius
172
Cut off the Part
177
Verify the toolpath
179
Save the updated MCX file TASK 17 Post and create the CNC code file
180
Create the geometry Part 1
287
Copyright

Common terms and phrases

Bibliographic information