Oil Well Testing Handbook
Oil Well Testing Handbook is a valuable addition to any reservoir engineer's library, containing the basics of well testing methods as well as all of the latest developments in the field. Not only are "evergreen" subjects, such as layered reservoirs, naturally fractured reservoirs, and wellbore effects, covered in depth, but newer developments, such as well testing for horizontal wells, are covered in full chapters.
What people are saying - Write a review
We haven't found any reviews in the usual places.
4 Pressure Drawdown Testing Techniques for Oil Wells
5 Pressure Buildup Analysis Techniques for Oil Wells
7 Well Testing Methods for Naturally Fractured Reservoirs
8 Fundamentals of Type Curve Matching Methods for Oil Wells
9 Flow Regime Identification and Analysis Using Special Methods
14 Injection Well Transient Testing and Analysis
15 Well Testing Methods in Multilayered Oil Reservoir Systems
16 Pressure Analysis Methods in Heterogeneous Oil Reservoir Systems
Conversion Factors Between Unit Systems
Correlation Tables and Dimensionless Functions
Pressure Drop through Vertical Inclined and Horizontal Oil Wells
Oil and Water PVT Properties and Correlation Equations
afterflow Analysis Methods anisotropic average pressure average reservoir pressure boundary Calculate compressibility crossflow data plot determine dimensionless pressure drainage area drawdown test estimate Example exponential integral flow efficiency flow period flow rate fluid following equation formation permeability graph horizontal Horner plot intercept interference test kmax linear flow log-log graph log–log match point Muskat oil formation oil reservoirs oil well testing porosity pšſ pressure behavior pressure buildup data Pressure Buildup Test pressure data pressure derivative pressure drawdown pressure drop pressure response pressure transient production pseudo-steady-state psi/cycle psia psig pulse test radial flow Ramey rb/stb semilog graph semilog straight line shut-in pressure skin effect skin factor slope Solution stb/day Table techniques Test Analysis test data Trans transient test type curve matching vertical fracture viscosity wellbore radius wellbore storage
Page 42 - Miller, CC, Dyes, AB and Hutchinson, CA, Jr.: "The Estimation of Permeability and Reservoir Pressure from Bottom Hole Pressure Build-up Characteristics", Trans., AIME (1950) Vol. 189, 91104. 2. Horner, DR: "Pressure Build-up in Wells", Proc., Third World Pet.
Page 658 - GASWAT-PC: A Microcomputer Program for Gas Material Balance with Water Influx," SPE Paper 16484, Petroleum Industry Applications of Microcomputer, Del Lago on Lake Conroe, TX, June 23-26, 1987.
Page 657 - Application of pD Function to Interference Analysis," paper SPE 6053 Presented at the SPE-AIME 51st Annual Fall Technical Conference and Exhibition, New Orleans, Oct. 3-6, 1976. Timmerman, EH, and van Poolen, HK, "Practical Use of Drill-Stem Tests,