QC/T 1067.1-2017 Translated English of Chinese Standard. (QCT 1067.1-2017, QC/T1067.1-2017, QCT1067.1-2017): Connector used in automobile wire harness and electrical device - Part 1: Definition, test method and requirementhttps://www.chinesestandard.net, 2019年12月7日 - 84页 This Standard specifies the definition, general performance requirements as well specific test methods for automobile connector. This Standard is applicable to low-voltage connector (voltage is not higher than 60V) and high-voltage connector (voltage is higher than 60V but not higher than 600V) used in automobile wire harness and electrical device, including in-line connector and device connector. |
常见术语和短语
assembling TPA assistance mechanism automobile cables of minimum Chongqing complete relevant tests connector shall include continuous tester crimp data logger Devices Force tester Dielectric strength engagement force extraction force fixing structure fixture force required frequency Table high-voltage connector high-voltage test device humidity chamber include all accessories industry standards Insert the terminal insulation resistance insulation support layer to prepare locked position locking device strength low-voltage connector maximum metal hoop Methods The test micro-current connection resistance minimum specification ohmmeter pair of terminals pairs of connectors peak force value peak reading characteristics Plug-unplug cycle pre-installed position prepare 10 pairs PSD and frequency QC/T random vibration PSD Record the peak relevant humidity relevant tests according Salt spray test sealed connector separation force speed of 50mm/min terminal hole Terminal insertion force terminal-applicable cables Test Methods test samples test sequence tester with peak Testing cable Thermal shock thinnest insulation layer thrust force uniform speed vehicle voltage drop