QC/T 1072-2017: Translated English of Chinese Standard. (QCT 1072-2017, QC/T1072-2017, QCT1072-2017): Automotive shift position sensor
https://www.chinesestandard.net, Nov 2, 2019 - Technology & Engineering - 19 pages
This standard specifies the requirements, test methods, inspection rules for rotary shift position sensors for automobiles. This standard is applicable to rotary shift position sensors for speed ratio adjustment of automatic transmissions of category M and N automobiles. Other types of shift position sensors may refer to this standard.
What people are saying - Write a review
We haven't found any reviews in the usual places.
Terms and definitions
Marking packaging storage custody
abnormal voltage angle apply Attachment automobile automotive industry standards basic performance buyer calculation carried out according chamber chemical industry China conducted immunity cyclic damp heat damage Duty cycle electric power steering electromagnetic electronic industry standards Empty stroke Environmental conditions exit-factory inspection Figure GB/T Group high-temperature immunity test implementation Industry and Information Industry Press Information Technology limit of signal Linearity low-temperature maximum angle measure Ministry of Industry Note Number oil resistance output value output voltage overvoltage performance shall comply performance test power steering device Protection provisions of 4.2 PWM output QC/T range rapid temperature change references requirements restored reverse Road vehicles Rotation sample sensor is subject sensor shall comply sensor’s output shift position sensors signal line speed standards are published storage test supplier Table Take Technical conditions Technology Temperature drift test environment test methods Test of resistance test voltage tested according transmission type inspection Vibration