QC/T 1072-2017 Translated English of Chinese Standard. (QCT 1072-2017, QC/T1072-2017, QCT1072-2017): Automotive shift position sensorhttps://www.chinesestandard.net, 2. nóv. 2019 - 19 síður This standard specifies the requirements, test methods, inspection rules for rotary shift position sensors for automobiles. This standard is applicable to rotary shift position sensors for speed ratio adjustment of automatic transmissions of category M and N automobiles. Other types of shift position sensors may refer to this standard. |
Efni
Foreword | 7 |
Scope | 8 |
Terms and definitions | 9 |
Test methods | 14 |
Inspection rules | 17 |
Marking packaging storage custody | 19 |
Common terms and phrases
22 automotive industry abnormal voltage Accelerometers automatic transmission automotive industry standards basic performance building materials industry carried out according chemical industry conditions and testing cyclic damp heat dedicated test device determined through negotiation device of automobile Duty cycle electric power steering electric vehicles electromagnetic immunity electronic industry standards Empty stroke free fall test full stroke Industry and Information Industry Press Information Technology insulation withstanding voltage limit of signal Linearity loads GB/T manner simulating maximum angle mechanical shock Ministry of Industry oil resistance performance shall comply point voltage power overvoltage power steering device provisions of 4.2 published by China rad/s rapid temperature change Road vehicles sensor for automobile sensor is subject sensor shall comply Shanghai shift position sensors signal line simulating the actual standards are published supplier Technical conditions test environment test methods Test of resistance test shall comply test voltage tested according testing for electrical type inspection voltage The sensor