QC/T 1118-2019 Translated English of Chinese Standard (QC/T 1118-2019, QCT1118-2019): Technical requirements for swap body of the van
https://www.chinesestandard.net, 3 janv. 2023 - 19 pages
This standard specifies the terms and definitions, technical requirements, test methods, inspection rules, signs, transportation of swap body of the van. This standard applies to the design, manufacture, inspection of swap body with closed structures.
39 automotive industry abnormality rendering allow each wall applying a force automotive industry standard axle load bend freely bottom surface building materials industry chemical industry standards China Electronics Standardization communications industry standards corner fittings deformation affecting deformation or abnormality dimensional requirements exit-factory inspection external dimensions front and rear Front stop greater than 12 guide pocket Industry and Information industry are published industry standard amendment Information Technology Inspection item installation position lift the swap lifting force light industry standards load the swap maximum total mass meet the dimensional metering technical specifications Ministry of Industry operation permanent deformation provisions of GB published by Beijing published by China rain-proof sealing performance Rainproof rear walls reflective marks Schematic diagram sealing performance test shown in Figure side wall standard number standards are published strength and longitudinal strength test Evenly structural dimensions terms and definitions test Evenly load test vehicle Type inspection unloading Vertical strength Δ Δ