QC/T 644-2014 Translated English of Chinese Standard. (QCT 644-2014, QC/T644-2014, QCT644-2014): Specifications for automobile metal fuel tankhttps://www.chinesestandard.net, 18. maí 2019 - 24 síður This Standard specifies technical requirements, test methods, inspection rules and marks, packaging, transport, storage for automobile metal fuel tank. This Standard is applicable to metal fuel tanks loaded with vehicle gasoline, vehicle diesel used for M category and N category vehicles. The metal fuel tanks of vehicle fuels such as alcohol fuel, biofuel, coal-to-liquid can refer to this Standard for implementation. The types and connection sizes of fuel tank cover and fuel filler port used for plastic fuel tank can also refer to this Standard for implementation. |
Efni
modified the application scope see Clause 1 of this Edition Clause 1 | 8 |
Technical requirements and test | 9 |
Marks packaging transport and storage | 16 |
Annex B Informative Schematic diagram of intake valve test device | 24 |
Common terms and phrases
according to GB/T biofuel body and nut body is carried carried out according Connect and seal connection sizes cover and fuel cover Gasket Fuel diagram of slot-type Dongfeng Motor Corporation Edition Figure A.5 filler port Fuel Fuel filler pipe fuel filler port fuel tank body fuel tank cover fuel tank Test fuel tank’s safety Gasket Fuel filler II-type inner fuel tank Installation diagram intake valve maximum liquid capacity metal fuel tank nominal tank capacity Outer cover Gasket Outer thread port Fuel filler pressure of fuel pressure of intake product certificate QC/T seal other accessories Sealing of fuel sheet and strip simulation loading form sizes of fuel standards are published strength between fuel Table A.1 tank shall comply tank Test according tank’s safety valve test methods test of fuel thread-type fuel tank Torsional strength type inspection types and connection U-type water pressure vibration durability test water or fuel water pressure gauge