QC/T 707-2004 Translated English of Chinese Standard. (QCT 707-2004, QC/T707-2004, QCT707-2004): Technical specification for center box for motor vehicleshttps://www.chinesestandard.net, 2017 M04 12 - 17 pages This Standard specifies terms and definitions, requirements, test methods, inspection rules, marking, packaging, storage and preservation of center box for motor vehicles. This Standard applies to center box for motor vehicles. |
Contents
Foreword | 5 |
Scope | 6 |
Requirements | 7 |
Test methods | 11 |
Inspection rules | 13 |
Marking packaging storage and preservation | 14 |
Annex A normative Load procedure of center boxes | 15 |
Annex B normative Test load of center boxes | 16 |
Common terms and phrases
able to normally allows an increase Anti-extrusion strength test Automobile Electric Appliance B.1 of Annex box for motor box shall comply carried out according center box combined cycle test connecting plug connecting sockets corresponding load procedure customer requirements dedicated test stand display the values disruptive voltage strength Durability test engine hood Figure A.1 flat inserts force and withdrawal humidity combined cycle increase of 20 insertion force inspection rules load from Figure load ventilation storage low temperature test motor vehicles motorcycles and mopeds No-load ventilation storage normally turn Overcurrent strength test plugs shall comply procedure and test remove the relay Resistance to disruptive Resistance to low Shape and installation specifications of 4.4 specifications of Table standard insert storage and preservation sweeping vibration test Table B.1 Temperature alternation test temperature and humidity test load Test method ventilation storage test voltage drop allows Voltage drop test voltage strength test withdrawal force test