Structural properties of two "Dunstone" wall constructions sponsored by the W.E. Dunn Manufacturing Co
What people are saying - Write a review
We haven't found any reviews in the usual places.
3-core block actual width AMBROSE H bed joint block as stretcher BUILDING MATERIALS Bureau of Standards compressive loads Concentrated Load concrete blocks Constructions for Walls cubic foot deflections and sets deflectometer deformations and sets described in BMS2 Dunstone Eight-foot wall specimens Elsmere Fabrication data foot of actual Four-Foot Wall Specimens gage length head joints hydrated lime impact loads kips per foot kips/ft l-core load on wall Load The results load was applied load-set solid circles loads were applied Masonry Construction Section Materials and Structures Maxi maximum load mortar mum load Speci National Bureau Partitions portland cement Properties of Low-Cost racking loads Research on Building results for specimens shown in figure shown in table span 7 ft Specimen C2 specimen CF-I1 specimens were built specimens were tested Steel Superintendent of Documents tion transverse load tural W. E. Dunn Manufacturing wall CG Wall Construction Sponsored wall speci weight width of specimen