Metal & Ceramic Matrix Composites: Processing, Modeling & Mechanical Behavior : Proceedings of an International Conference Sponsored by the Joint TMS/ASM Composite Materials Committee, the TMS Powder Metallurgy Committee and the TMS Physical Metallurgy Committee, and Held at the TMS Annual Meeting in Anaheim, California, February 19-22, 1990 |
Contents
Intermetallic and Ceramic Matrix Composites for 815 to 1370C | 3 |
MatrixReinforcement Development for AluminiumBased | 13 |
Laminated Metal Matrix Composites by Tape Casting | 23 |
Copyright | |
55 other sections not shown
Common terms and phrases
A.H. Clauer A.M. Ritter alloy alumina aluminum aluminum alloy aspect ratio atomization bonding carbon ceramic Ceramic Matrix Composites compacts Composite Materials consolidation creep cyclic damping decrease deformation density deposition diffusion ductility Edited by R.B. effect elastic modulus electron experimental extrusion fabricated fatigue fiber reinforced fracture surface fracture toughness grain graphite high temperature hot pressing increase interface intermetallic Kumar and A.M. layer load matrix alloy Mechanical Behavior Edited mechanical properties melt Metal & Ceramic Metal Matrix Composites Metals & Materials method micrograph microstructure Modeling & Mechanical modulus mullite observed oxidation particles phase platelets powder metallurgy preform processing R.B. Bhagat reaction zone residual stresses Ritter The Minerals room temperature samples shear shown in Figure shows Sic fiber SiC particulates SiC whiskers SiCp silicon carbide sintering solidification specimens strain rate technique tensile strength thermal expansion TiB2 titanium unreinforced velocity volume fraction whisker whisker reinforced ZrO2