Soldering Manual |
From inside the book
Results 1-3 of 43
Page 12
... Table 2.3 , however , has excellent soldering and strength characteristics . It is useful for applica- tion where ... Table 2.3 Composition ( weight % ) — Tin - Antimony Solder Temperature ( F ) Tin 95 Antimony Solidus Liquidus 5 452 464 ...
... Table 2.3 , however , has excellent soldering and strength characteristics . It is useful for applica- tion where ... Table 2.3 Composition ( weight % ) — Tin - Antimony Solder Temperature ( F ) Tin 95 Antimony Solidus Liquidus 5 452 464 ...
Page 14
... Table 2.7 Cadmium - Silver Solder - Composition ( weight % ) Temperature ( F ) Cadmium Silver Solidus Liquidus Pasty Range 95 5 640 740 100 Cadmium - Zinc Solders The cadmium - zinc solders , listed in Table 2.8 , are useful for ...
... Table 2.7 Cadmium - Silver Solder - Composition ( weight % ) Temperature ( F ) Cadmium Silver Solidus Liquidus Pasty Range 95 5 640 740 100 Cadmium - Zinc Solders The cadmium - zinc solders , listed in Table 2.8 , are useful for ...
Page 15
... Table 2.9 , is specifically for use on aluminum and develops joints with high strength and good corrosion resistance . The solidus temperature of the solder is high , which limits its use to applications where soldering temperatures in ...
... Table 2.9 , is specifically for use on aluminum and develops joints with high strength and good corrosion resistance . The solidus temperature of the solder is high , which limits its use to applications where soldering temperatures in ...
Contents
Introduction Chapter 1 Principles of Soldering | 1 |
Solders | 5 |
Fluxes | 25 |
Copyright | |
19 other sections not shown
Common terms and phrases
alloys containing aluminum alloys Ammonium chloride antimony assembly base metal brass bronze butt joints cadmium cast iron cent by weight cent tin Chapter chemical cleaning coating Composition weight copper bits corrosive fluxes dip soldering electrical eutectic flame flow flux residue fusible alloys Gauge and Lighter heating methods high-nickel alloys Hydrochloric acid Hydrofluoric acid Inconel induction heating joining joint design lap joint lead pipe lead solder liquidus temperature low melting magnesium melting temperature metal surfaces molten solder nickel noncorrosive fluxes oven oxide film plated POST SOLDERING TREATMENT precoated printed circuit PROBLEMS IN SOLDERING Reaction removed seam sheet silver solder bath soldered joints soldering aluminum soldering iron soldering operation soldering temperature solders containing solidus temperature specific stainless steel strength SURFACE PREPARATION Table techniques temperature solders tin content tin-50 lead tin-lead solders tin-zinc tinplate torch type fluxes ultrasonic soldering usually Welding wetting wiped wire zinc chloride