Second International Conference on the Strength of Metals and Alloys, Asimolar Conference Grounds, Pacific Grove, California, 30 August-4 September 1970: Conference Proceedings |
Contents
Aluminum Alloys by N Igata S Tsuchida Y Katori and R | 16 |
Plastic Deformation of BCC Metals by Prof J | 29 |
8 | 33 |
23 other sections not shown
Common terms and phrases
Acta activation energy alloys annealing applied stress Arsenault athermal bcc metals Burgers vector calculated compression concentration constant cross slip cyclic hardening decrease determined dislocation density dislocation velocity double kink edge dislocations effective stress elastic electron equation experimental flow stress glide grain boundary increase interaction internal stress iron J. W. Christian kg/mm² kink lattice load drop loops low temperatures measured mechanism mobile dislocation modulus molybdenum niobium observed obtained orientation oxygen parameter Peierls Phil Phys plastic deformation plastic strain plotted polycrystals prestrained pure resolved shear stress room temperature screw dislocations shown in Fig shows single crystals slip lines slip plane slip systems solid solution solute atoms solution hardening specimens stacking fault strain rate strength stress amplitudes stress relaxation stress-strain curves structure surface tantalum temperature dependence tensile tension tests theory thermally activated Trans twinning vanadium variation Vitek work-hardening yield stress