 Section 1, the undersize from the %-in. trommel is screened on 1% by 12-mm. trommels, the undersize going to the Anaconda classifiers and the oversize to the Hancock jigs. The treatment of the products from this point is the same in all sections, except...  The Flotation Process - Page 192by Herbert Ashton Megraw - 1916 - 249 pagesFull view - About this book
 | Mineral industries - 1915 - 954 pages
...sections are alike up to this point. In Section 1, the undersize from the %-in. trommel is screened on 1^2 by 12-mm. trommels, the undersize going to the Anaconda...double compound Evans jigs and the undersize going to \Yi by 12-mm. trommels. The undersize from these trommels goes to the Anaconda classifiers, the oversize... | |
 | American Institute of Mining, Metallurgical, and Petroleum Engineers - Metallurgy - 1917 - 1022 pages
...by 12-mm. trommels, the ucndersize going to the Anaconda classifiers and the oversize to the Hanock jigs. The treatment of the products from this point...undersize from the %-in. trommel is screened through 4-mrn. trommels, the oversize from these going to the double compound Evans jigs and the undersize... | |
 | Herbert Ashton Megraw - Flotation - 1918 - 382 pages
...are alike up to this point. In Section 1, the undersize from the %-in. trommel is screened on lj£ by 12-mm. trommels, the undersize going to the Anaconda...the same in all sections, except that Section 1 uses tube mills in place of Hardinge mills for grinding, as noted previously. The undersize from the %-in.... | |
 | Mineral industries - 1916 - 114 pages
...sections are alike up to this point. In Section 1, the undersize from the 8-in. trommel is screened on lJ by 12-mm. trommels, the undersize going to the Anaconda...tube-mills in place of Hardinge mills for grinding. The undersize from the 8-in. trommel is screened through 4-mm. trommels, the oversize from these going... | |
| |
