Laboratory Manual of Testing Materials

Front Cover
McGraw-Hill book Company, Incorporated, 1913 - Building materials - 135 pages
0 Reviews
 

What people are saying - Write a review

We haven't found any reviews in the usual places.

Other editions - View all

Common terms and phrases

Popular passages

Page 77 - ... and, in smoothing off, the trowel should be drawn over the mold in such a manner as to exert a moderate pressure on the excess material. The mold should be turned over and the operation repeated.
Page 70 - Method. — As a method to be followed for the analysis of cement, that proposed by the Committee on Uniformity in the Analysis of Materials for the...
Page 73 - Section 37, and quickly formed into a ball with the hands, completing the operation by tossing it six times from one hand to the other, maintained about 6 in.
Page 122 - F. as practicable, and observed at intervals for at least 28 days. (c)^ A third pat is exposed in any convenient way in an atmosphere of steam, above boiling water, in a loosely closed vessel for five hours. 23. These pats, to satisfactorily pass the requirements, shall remain firm and hard, and show no signs of distortion, checking, cracking, or disintegrating.
Page 73 - C being 1 cm. in diameter for a distance of 6 cm., the other having a removable needle D, 1 mm. in diameter, 6 cm. long. The rod is reversible, and can be held in any desired position by a screw...
Page 120 - Pats of neat cement about three inches in diameter, one-half inch thick at the center, and tapering to a thin edge, shall be kept in moist air for a period of twenty-four hours.
Page 119 - The cement shall be stored in such a manner as to permit easy access for proper inspection and identification of each shipment, and in a suitable weather-tight building which will protect the cement from dampness.
Page 121 - This term is applied to the finely pulverized product resulting from the calcination to incipient fusion of an intimate mixture of properly proportioned argillaceous and calcareous materials, and to which no addition greater than 3% has been made subsequent to calcination.
Page 73 - ... held in the other hand, completely filling the ring with paste; the excess at the larger end...
Page 74 - Committee has recommended, as normal, a paste the consistency of which is rather wet, because it believes that variations in the amount of compression to which the briquette is subjected in moulding are likely to be less with such a paste.

Bibliographic information