5 pages matching oil-inlet temperature in this book
Results 1-3 of 5
What people are saying - Write a review
We haven't found any reviews in the usual places.
35-Millimeter-Bore Ball Bearing 667 newtons axial grooves bearing bore bearing inner ring bearing lubrication bearing temperature cage design centrifugal force cmVmin 0.50 gal/min contact angle cooling 25 percent cooling Jet lubrication cooling through housing different lubricant supply dimensions and cage Effect of lubricant flow distribution pattern flow through bearing high-speed bearing tester inner ring cooling inner ring lubrication inner ring temperature inner-ring inner-ring-lubricated bearings Jet lubrication ref jet-lubricated bearing kilowatts 1.7 kilowatts 3.7 hp Lewis Research Center load of 667 Lubricant flow rate lubricant supply systems lubricated bearing lubrication and 75 methods of lubrication NASA newtons 150 lb occurred at 72 oil flow distribution oil flow rate oil-inlet temperature outer ring cooling outer ring temperature percent cage slip percent for inner percent for lubrication ring cooling 25 ring cooling Jet Schuller shown in figure Signer single-outer-land-guided cage slip of 7.0 strain gage test bearing thermocouple thrust load total oil flow