Determination of the Flow Characteristics of Lubricating Greases: The S.O.D. Pressure-viscosimeter. Summary Report, Project C.L.L.G. 20-43. Grease Projects, General Division, Coordinating Lubricants Research Committee of the Coordinating Research Council, IncTechnical Committee, National Lubricating Grease Institute, 1946 - 86 pages |
From inside the book
Try this search over all volumes: Linseed Oil
Results 1-0 of 0
Contents
5 OPERATION OF S 0 D PRESSUREVISCOSIMETER | 5 |
TEMPERATURE CONTROL | 8 |
ACCURACY OF PRESSUREVISCOSITY TESTS | 24 |
4 other sections not shown
Common terms and phrases
accuracy accurate apparatus Apparent Viscosity application base bath bearing Cabinet calculated calibration capillary cause Chapter considerable Consistency constant constant temperature construction containing cooperative test corrected curves cylinder detail determined developed drive effect equipment error Figure flow characteristics flow rate fluid gage pressure gear give given Grease Viscosity hydraulic oil hydraulic system indicated installed Institute involved Laboratory length limits low temperature Lubricating Greases measurement Method mineral oil minus modification motor mounted noted operation particularly possible PRESSURE VISCOSITY Pressure-Viscosimeter proper properties provides pump Quaker range rate of shear ratio recommended reducer reference removed reproducibility running S.O.D. Pressure-Viscosimeter satisfactory seconds Shear Rate shown soap speed standard starting sufficiently suitable Table Technical test cylinder test temperature Theoret thermocouple Tooth torque Tube typical unit values Viscosimeter Viscosity in Poises Volume Zimmer