 Immediately upon receipt, all wheels shall be closely inspected to make sure that they have not been injured in transit or otherwise. For added precaution, wheels should be tapped lightly with a hammer; if they do not ring with a clear tone they should...  Making the Small Shop Profitable - Page 16by John Herbert Van Deventer - 1918 - 113 pagesFull view - About this book
 | Accidents - 1915 - 672 pages
...shall be assigned to the mounting, care and inspection of grinding wheels and machines. D2. J'efore mounting, all wheels shall be closely inspected to...precaution wheels other than of the elastic and vulcanite type should be tapped lightly with a hammer, if they do not ring with a clear tone they should not... | |
 | David Stewart Beyer - Accidents - 1916 - 444 pages
...men shall be assigned to the mounting, care and inspection of grinding wheels and machines. D 2 — Before mounting, all wheels shall be closely inspected...precaution, wheels other than of the elastic and vulcanite type should be tapped lightly with a hammer; if they do not ring with a clear tone they should not... | |
 | New Jersey. Department of Labor - Factory inspection - 1919 - 172 pages
...20 % 131/2 1% 28 4 6 22 7| 14V2 114 30 4 6 24 % 10 1*4 36 4 G 2S 1 20 1% SECTION 5. MOUNTING : (a) Before mounting all wheels shall be closely inspected to make sure that they have not been injured iu transit, storage or otherwise. (See Section 9-b.) (b) Grinding wheels shall fit freely on the spindles;... | |
 | New Jersey. Department of Labor - Factory inspection - 1919 - 166 pages
...thickness, which should be laid flat on a straight surface to prevent warpage. (6) Immediately upon receipt- all wheels shall be closely inspected to make sure that they have not been injured in transit or otherwise. For added precaution, wheels should be tapped lightly with a hammer ; if they do not... | |
 | Railroad engineering - 1926 - 812 pages
...shall not exceed this amount. Inspection of wheels — Immediately upon receipt, all wheels should be closely inspected to make sure that they have not been injured in transit or otherwise. As an added precaution, wheels should be tapped gently with a light implement, such as... | |
 | Factory management - 1927 - 216 pages
...protection, but shall not exceed this amount Inspection of Wheels Immediately upon receipt, all wheels should be closely inspected to make sure that they have not been injured in transit or otherwise. As an added precaution, wheels should be tapped gently with a light implement, such as... | |
 | Frederic Burnham Jacobs - Abrasives - 1928 - 572 pages
...economical in the long run. STORAGE OF GRINDING WHEELS Upon receipt, all grinding wheels should be inspected to make sure that they have not been injured in transit. Then Thin Wheels Piled Flat 6" Wheels. V Wheels »' Wheels 2 'Wheels U'ond 16" Wheels CONVENIENT RACK... | |
 | Civilian Conservation Corps (U.S.) - Accidents - 1938 - 196 pages
...is in motion. They must be maintained in good condition. 11. Before mounting, all wheels shall again be closely inspected to make sure that they have not been injured. Grinding wheels shall fit freely on the spindles ; they must not be forced on, nor should they be too... | |
 | United States. War Department - Lathes - 1940 - 410 pages
...— Grinding wheel abrasive spacing. 6. Care. — a. When grinding wheels are received, they should be •closely inspected to make sure that they have not been injured in packing and shipping. This inspection may be made by observing the wheel closely for broken edges.... | |
| |
