The BSCCO System, Volume 1
This 35th volume of the 'Studies' is devoted to the technologically important BSCCO system. It focuses on a host of topics such as the synthesis and fabrication of conductors, superconducting BSCCO magnets, and the basic technological properties of the material in relation to the microstructure. The authors are distinguished in the field, working in different parts of the world, maintaining the international character of the series.
What people are saying - Write a review
We haven't found any reviews in the usual places.
POWDER PREPARATION BEFORE PIT PROCESSING
DEVELOPMENT OF BIBASED OXIDE SUPERCONDUCTING MAGNETS
MAGNETIC AND TRANSPORT PROPERTIES OF THE BI2223 PHASE INSIDE AgSHEATHED TAPES
MICROSTRUCTURE AND PROPERTIES OF BIBASED SUPERCONDUCTORS IN THE PARTIAL MELTING AND SINTERING PROCESS
CONTROL OF INTER AND INTRAGARIN MLCROSTRUCTURES AND Jc OF Bi2Sr2CaCu2OxAG TAPES
Abrikosov vortices AEC inclusions AEC laths AgMg alloy anisotropy annealing Appl applied bending BSCCO c-axis Ca2PbO4 Calc calcination calcined powders composition conductors configuration cooling critical current density cryocooler crystallization decreases dependence electrophoretically deposited Figure fill factor flux pinning grain alignment grain boundaries grain coupling grain size heat treatment conditions high-temperature optical hysteresis loops increasing indicates Kitaguchi Kumakura layers Lett liquid phase magnetic field matrix melted at 875 micrographs microstructure milling Nernst effect observed obtained optimal oxide pancake coils partial melting Pb-doped peaks peritectic reaction Phys Physica pinning centers precursor powder R-T curves ratio samples sintered Seebeck effect sheath shown in Fig shows Sint sintered at 840 sintering process solidification substrate Supercond superconducting surface morphology tape surface tapes prepared tapes treated temperature range textured thermal conductivity Togano transport critical current values volume fraction vortices XRD patterns